(800) 853-2651
SHOP NOW

Recent content by Keddano

Yesterday's Tractor Forums
  1. K

    Heisler Live PTO - Decoded

    Here is a photo of the clutch engaged. And also of the 4 springs that help hold the pressure plate away from the disk when disengaed. Mine were bad (colapsed),so I replaced them.
  2. K

    Heisler Live PTO - Decoded

    Figure I'd add a update for anyone else needing advise on adjusting them. Remove the 4 bolts on the cover after unhooking the brake adjuster. With cover removed, the Throwout/In Bearing has 1 spring loaded pull pin that allows the hub of it to be screwed in to tighten the pressure plate. When...
  3. K

    Just a thought...

    I had a guy come up to me years ago at one of the first Michigan NATPA pulls and was talking to me about my 77, He Came from Canada and said he had a 77 he wanted to start pulling back home. I told him if he was back on Sunday I"d let him pull mine in a EMTPA class. Well sunday he was there...
  4. K

    Troubles second day of haying season

    Maybe Cross drill and bolt it to get thru hay season.
  5. K

    Great Lakes Classic

    Good Luck with it this year,Glad to see The Great Lakes Classic is still going strong. Thanks to the great leadership behind it. Tell everyone I said Hi Charlie.
  6. K

    Mount Pleasant...who's going?

    Planning on making it down and pulling in the Modifed Stock Classes. I'll be pulling the '77 Called Sixgun Blaz'in. Hopefully this darn weather pattern will stop the rain.
  7. K

    Looking for John Deere Van Brunt manual

    I have one from my old VB,E-mail if you want.
  8. K

    IH 47 Baler ManualTensioner Question...

    Per the manual on the #46 bale,so I think the 47 would be the same,they say set the manual tensioner to have 2-10 foot pound of pulling pressure(or resistance)
  9. K

    John Deere Crimper

    Cut the hay on saturday and ran the crimper yesterday. A little back story first. Last year picked up a Casse 10 mower,and fought getting hay cut with it. This year I replaced all the blades and 12 new guards,started cutting and was fighting with it clogging,so I pulled all the old guards and...
  10. K

    John Deere Crimper

    I went and picked it up today. It's a 21, there was also a 22 there that someone had took the drive shaft nearest the tractor from. It is field ready. Looks like a low hour one. A few questions, my case mower has the hitch point directly behind. So with that set-up, you would be crimping the...
  11. K

    John Deere Crimper

    Gave up on pulling a Mower/conditioner behind the H. Just put all new blades and replaced some bad guards on the Case 10 Sickle Mower,gave it a try and seems to cut great with no clogging as before. So yesterday,I came across a nice JD crimper,couldn't find a tag or # model # on it. But it has...
  12. K

    John Deere Hay Crimper

    What part of Mo. There is one up here near Cedar Rapids that could be had,would have to check price.
  13. K

    John Deere Hay Crimper

    What part of Mo. There is one up here near Cedar Rapids that could be had,would have to check price.
  14. K

    Mower/conditioner for a Farmall H

    I"ve located a Nice John Deere Crimper,Worth investing in over not using one? Normally don"t they save about a day of drying time?
  15. K

    Mower/conditioner for a Farmall H

    Sounds like the H is a little too light in the muscle deptment. It basicly a grass field with so alfalfa and clover. With the Hesler Live PTO it handles the IH 46 Baler just fine. I just bale 4 acres for the horses. So maybe I'd be better just looking for a crimper to use after the Case 10...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top