Recent content by Kruh0919

  1. K

    Ford 3400 new clutch not disengaging

    Hi guys. I just changed the clutch on my 3400. After getting it back together the clutch won't disengage. I have adjusted the linkage both directions and can't get either stage to disengage. Any suggestions on what I did wrong?
  2. K

    Ford 3400 power steering flush

    Took care of the foam with the new filter!! But now that i have it all back together there is power steering fluid coiming out of the gear shifter. Any suggestions?
  3. K

    Ford 3400 power steering flush

    I only see 3 seals in the diagram. Is there a better diagram for the rebuild I can't find in my manual? The rebuild kits I'm seeing listed have 8 or so O rings along w other seals
  4. K

    Ford 3400 power steering flush

    Should I install the new filter and see if it subsides or keep flushing with old filter? Also I saw a pump seal kit for $12. Should I go ahead and change the seals while I am in there.
  5. K

    Ford 3000 brake linkage binding / not engaging

    Dave do you have the part numbers for the springs? My brake pedals stick also
  6. K

    Ford 3400 power steering flush

    I recently purchased a 3400 that is in kind of rough shape. It is my first tractor so everything is new to me... To start I am replacing the power steering cylinder as the stud on the tie rod end was snapped and the seal was blown. When removing the old cylinder the fluid was a "chocolate milk."...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top