Recent content by langdangnebraska

  1. L

    Dual 3100 Grapple Cylinder

    Good morning everyone, I just traded my IH 674 with a GB loader for a 656 with a Dual 3100 loader. Overall I'm pleased by the way everything is besides the narrow bucket and the grapple cylinder needs replaced. Not rebuilt, it needs replaced. Does anybody have a part # for the complete...
  2. L

    IH 656 loader hydraulics

    I'm definitely gonna look at pumps for the front and back.
  3. L

    IH 656 loader hydraulics

    I never thought about that. I'll look for a front mounted pump.
  4. L

    IH 656 loader hydraulics

    Sounds good guys, does anyone know if constantly running the PTO is actually hard on a 656??
  5. L

    IH 656 loader hydraulics

    Hello everyone, I'm going to pick a 656 up this weekend and it has a PTO pump for the loader. The pump has a seal out and I've been debating about just getting rid of the pump completely and running it off the tractor hydraulics. Do these tractors have enough hydraulics to lift a round bail? Or...
  6. L

    IH 674 NO FIRE

    Got it, I was alittle mixed up. Thanks for the help!
  7. L

    IH 674 NO FIRE

    All of that stuff looked good to me. I'll be able to look into it more this afternoon.
  8. L

    IH 674 NO FIRE

    It's got clean gas going up to the carb. Brand new jet. I'm leaning towards a timing issue.
  9. L

    IH 674 NO FIRE

    I will check that this afternoon.
  10. L

    IH 674 NO FIRE

    I will be doing a TDC compression stroke later. From my understanding, according to the picture, when its at TDC the rockers labeled 1 should have compressed springs?
  11. L

    IH 674 NO FIRE

    i honestly just took the same rockers that were adjusted off the head i used. I turned it over a few times to make sure that they were all somewhat tight. i will try going off of that diagram later today if i can get to it. thatnks you for the help
  12. L

    IH 674 NO FIRE

    Not so wet with gas, definitely plenty of vacuum.
  13. L

    IH 674 NO FIRE

    Hello everyone, I've been working with this old 674 for over a year now. I bought it locked up, got it unlocked and running and then found out it had a cracked head. I pulled a good head and valve train off another C200 and got everything put together. When I'd try to start it, it acted like it...
  14. L

    IH 674 carb

    I ended up breaking down and getting the exact replacement off of eBay last night. If I didn't need it so soon I would have waited and shopped around more.
  15. L

    IH 674 carb

    hello all, after replacing the head on my 674 I ran into another issue with my carb. I've had it apart at least 5 times in the last year. (it sat for years before). I'm to the point where I'm just going to buy a new carb. The carb is a Zenith 14997. My question is, do you guys recommend any...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top