Recent content by lil mac

  1. L

    valve springs

    I recently purchased a IH valve overhaul kit order # A403161-0403. As I was removing the head I realized it did not have rotating exhaust valves. Can I return the short springs and get 4 of the regular (longer) springs? We are trying to get done for the next tractor pull ASAP and need these...
  2. L

    valve springs

    I need to replace the valve springs on a on a farmall 340-C135 head. I would prefer a slightly stiffer spring than original non rotating. Any suggestions what to use and where available.
  3. L

    farmall super c

    Where can I find a dealer to buy a set of roller rocker tappets?
  4. L

    Super C alternator

    Thank you for the comment. When we bought the SC it had a new 6-volt. Would hardly turn it over. I put a new 8v and it lasted a year and would not hold charge. The btry test said it was bad. So, thinking it had a warranty went to get a new 8v. T everyones surprise they do not warrany 8v...
  5. L

    Super C alternator

    We are switching from 6-volts to 12 on our super C. Somewhere I read of a 12 volt Alternator that looks exactly like the original 6-volt. Trying to retain the original look. Anyone know who handles such a alternator?
  6. L

    l951 SuperC

    Thanx, thats what I needed to know
  7. L

    l951 SuperC

    Is the SC positive ground or negitive ground? My shop manuel does not address it.
  8. L

    fuel pump F-14

    Needing a rebuilt fuel pump for F-14. Suggestions?
  9. L

    fuel pump F-14

    Needing a rebuilt fuel for F-14. Suggestions?
  10. L

    fuel pump push rod

    I have a new rod and diaphram from Rice. I put a new rod in about 3-years ago and the old slipped rite out as did the new one. If it was bent it would slowly tighten up but I put vice grip on and it feels like it is hitting th wall all around. When I pull hard it still turns 360 easily.
  11. L

    fuel pump push rod

    Forgot to mention the tractor is a Farmall F-14
  12. L

    fuel pump push rod

    Been having trouble w/blowing diaphrams and gas going into oil pan. After removing the fuel pump to replace the diaphram I discovered I cannot remove the push rod. Normally I can pull it out w/no problem. It comes out about 1/4 to 1/2" and hits a wall like feeling. I turn it around same thing...
  13. L

    F-14 Fuel Pump

    I am not sure how the excess gas gets back to the tank! I do know the last time this happened the oil pan had all 3-gallons of fuel in it along w/ the Gov and everything else. A real mess. Since then I turn the gas tank off. It still goes to the oil pan when I run the engine.
  14. L

    F-14 Fuel Pump

    Restored this 14 5-years ago. In the past 3 months the diafram has blown out twice. The only change I have made is a new fuel pump push rod. I do not know what could be blowing the diaframs. Sugestions would be appreciated.
  15. L

    oil dip stick...super C

    Forgot to mention I put 2-new ones from Rice 2-months ago and one of them has leaked from the beginning. Must have been made in china.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top