Recent content by LyBo

  1. L

    1951 CA

    Steve, My wiring is exactly as the sketch you provided. Any other suggestions? Thanks, Lynn
  2. L

    1951 CA

    Bob, I made a mistake in my description. The black wire was wired to the F term, and not the Arm term. If I pull the light switch to the first position without the tractor running, the ammeter goes to 3 positive charging, and back to zero if I push the switch back in. If I crank the engine and...
  3. L

    1951 CA

    I made one error in describing how I currently have my 1951 Ca wired. The statement describing "one black wire in the harness goes from the arm post" should have said "one black wire in the harness goes from the field post on the Gen to the R term on the light switch.
  4. L

    1951 CA

    Thanks for the response. But why do the points remain stuck after the engine is off?
  5. L

    1951 CA

    Howdy, I recently posted a problem with the electrical charging system of my restored CA, and had several responses. Thank you who responded, but I still have problems. Everything is back to original, and all components are either new or rebuilt. I have three wires on the positive side of the...
  6. L

    1951 CA

    Howdy, I recently posted a problem with the electrical charging system of my restored CA, and had several responses. Thank you who responded, but I still have problems. Everything is back to original, and all components are either new or rebuilt. I have three wires on the positive side of the...
  7. L

    1951 AC CA

    Jim, Thank you for the response. I had previously attepted to polarize the generator, but I omitted the step of using a jumper from the field terminal to shiny metal. (It is positive ground, 6 volts). I will give it another try. Thanks, Lynn
  8. L

    1951 AC CA

    Hello, I have finally recovered from falling off the barn roof, and have just cranked my restored CA. I have a charging problem. The ammeter is not moving at all the way I have it wired, and the generator is not charging. I reversed the wires on the ammeter, and when I pull the switch to the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top