Recent content by M.Miller

  1. M

    Do I Need This Gasket?? Unstyled B Clutch

    Yeah, as you are showing you don't need a fancy shop to do it in it just makes it a little nicer. Looks like you are getting close. This is what mine ended up like. <a href="http://s736.photobucket.com/user/my1936johndeere/media/1936%20JD%20B%20Rebuild/20130907_140332.jpg.html"...
  2. M

    Do I Need This Gasket?? Unstyled B Clutch

    This is how I installed mine, this is how it was before I did the restoration. <a href="http://s736.photobucket.com/user/my1936johndeere/media/1936%20JD%20B%20Rebuild/20130705_151732-1.jpg.html" target="_blank"></a>
  3. M

    sloppy steering

    It depends on were the slop is at. Where the steering shaft goes in at the front pedistal it has a worm type gear on the end and that interacts with the sector gear on the vertical shaft going down to the spindle casting. Where the sector gear is at the top there is a ecentric bushing that can...
  4. M

    1936 JD B Complete Rebuild Pictures

    Set up for painting. Primed Painted Completed This was a long process, but a fun one. I can feel good about calling this restored. Questions or comments are welcomed.
  5. M

    Re: 1936 JD B Complete Rebuild Pictures

    Are you looking at it in Modern View? I just clicked on it now from modern view and it took a few seconds to buffer it to my viewer and then I was able to see it. I have a Photobucket page I could supply the link if you think that would work better.
  6. M

    1936 JD B Complete Rebuild Pictures

    Latest progress on the rebuild. This is a video of it running after 3-1/2 years of being torn down.
  7. M

    1936 JD B Complete Rebuild Pictures

    More pictures from this weekends work. Cylinders &amp; pistons in, flywheel on, govenor on. I preset the govenor to fan shaft backlash on the bench. Any questions or other pics just let me know.
  8. M

    1936 JD B Complete Rebuild Pictures

    Some more pictures from this weekends work.
  9. M

    1936 JD B Complete Rebuild Pictures

    I am replacing all of the roller type bearings in the tractor. I got mine from Motion Industries. I made a Excel spreadsheet listing the JD number and the corrisponding number from the brearing. Like New Departure 1205. They were able to get everthing in needed. Cost me between $600-$700.
  10. M

    1936 JD B Complete Rebuild Pictures

    It's called Glyptal. Got it from Eastwood. Used to coat inside of castings.
  11. M

    B governor disassembly

    You will need to press it off. You may need heat. I broke the bevel gear trying to press one of these apart. I can take a picture of mine and post it tommorow.
  12. M

    1936 JD B Complete Rebuild Pictures

    The shims are tied togerther that I took out. The manual I have says to leave .003" of clearance.
  13. M

    1936 JD B Complete Rebuild Pictures

    As far as I know your tractor would have shimable bearing inserts. The ones in my tractor I think are the original ones. I have replaced all of the bearings except the mains. Good luck on yours. I will post some pics of my mains.
  14. M

    1936 JD B Complete Rebuild Pictures

    Thanks for comments. I feel the same way, I will feel good about saying restored. It is a 61 Chevy Impala owned by brother.
  15. M

    1936 JD B Complete Rebuild Pictures

    I have owned this tractor for 14yrs. I decided 3 yrs ago to do a complete teardown and rebuild. Here is what it looked like when I started. In process of teardown... I have several more pictures if anyone wants more. Here are some new rebuild pictures...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top