Recent content by Mad340

  1. M

    Corn crib questions

    I am looking picking about 7 acres of corn this year and need a crib to store it. I have been back and forth on whether I should find a used wire crib or build a traditional wooden one? I live in Western Pennsylvania and wonder if the round crib would not dry down as well or keep the corn from...
  2. M

    JD 7000 No Till

    I want to plant some of my own corn this year and I am looking at a 4 row JD 7000 conventional planter. It has the no till coulters on it. Would I be able to successfully no till corn into bean ground with this planter? Ideally I would want to remove the coulters and put on row cleaners and...
  3. M

    Farmall M Hydraulics

    I have a 1952 M with belly pump. Last winter I dropped the pump and changed out the main seal by the drive dog. It still leaked a little. When I had the M hooked up to a Haybuster 77C no-till drill I could only raise the drill for about a half hour of operating time, After the oil got warm...
  4. M

    4 row jd 7000

    Would a Farmall m be able to pull 4 row jd 7000 no till with row cleaners and/or liquid or dry ferilizer? Also, would a hydraulic PTO pump to run hydraulics Rob too much power from the tractor?
  5. M

    Will Farmall m pull grain drill.

    I have a 1952 Farmall m with 1 set of rear weights. It is set up for two way hydraulics. I am wanting to farm about 10 acres on my own this year and do so by renting counties Haybuster 77c grain drill. Drill weight with seed is about 3800lbs. My ground is flat, will my M handle this? Thanks
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top