Recent content by MadMonk

  1. M

    TO35 and FE35

    Thanks. Was a bit confused there. Love my TO!
  2. M

    TO35 and FE35

    TO35 and FE35...what is the difference? Just curious...
  3. M

    TO35 Pressure Plate Issues

    To all the guys who gave me pointers and tips concerning the problem with the pressure plate I put on my 35, I ended up taking it to a pro who found that the backing plate on the unit was a good inch and 3/4 thinner than the original one that came off (that bolts to the flywheel). He says it...
  4. M

    TO35 Pressure Plate Issues

    Yes, both bearings are new and identical to the ones that came out (the throw out was totally locked up). And the clutch pedal shaft, even when fully turned "out", still does not bring the contact any closer. It is all split open again and I will be seeing if something was assembled wrong...
  5. M

    TO35 Pressure Plate Issues

    I have triple checked all movements on everything that moves slides or pushes.The bearing comes all the way out.
  6. M

    TO35 Pressure Plate Issues

    I do not have a service manual, but there really is not much adjustable other than the pedal itself on the shaft. The "finger" adjustment is, from what I can see, for fine tuing the contact to the bearing. I will get a manual though, because I am missing something here.... Thx
  7. M

    TO35 Pressure Plate Issues

    Greetings to all. I have a 1955 Ferguson TO35 with the dual clutch. Was backing up when the clutch pedal lost resistance, went all the way down and the old girl lunged back. Shut her down and had no clutch action at all. Split it in half and found the 3 pressure plate fingers had sheared off...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top