Recent content by Mark Albers

  1. M

    460 utility steering gear

    You don't say wether you have power steering or not. I have a '59 460 utility with manual steering and a loader so the steering has a lot of slop in it at every component. I contacted Jackson Power Steering to see if they have a conversion unit for it and they do not. So it seems that finding...
  2. M

    Need an alignment tool to install Super A clutch

    When doing the clutch on my 460U, I bought an alignment tool and still couldn't get it right. Ended up slipping the clutch assembly on the shaft then slowly recoupled making sure pilot started then bolted to flywheel through the bottom access cover. Don't know if A is configured similarly but...
  3. M

    IH 300U steering woes soon to be resolved!

    No luck on the 460U. Got an email from Roland saying he can't provide steering for that model. Too bad -thought this might be the answer I was looking for.
  4. M

    IH 300U steering woes soon to be resolved!

    This is exactly the sort of set up I'm looking for to use on my 460U. After seeing your post I went to the site to see if he offers one - its not listed but I'm hoping one of them will work.
  5. M

    Adding Hydraulic Remotes

    That's great advice on the tel-a-depth. Glad I asked, I would have made a mistake. Going to go with using the bucket remote. Thanks for the help.
  6. M

    Adding Hydraulic Remotes

    I have one to the loader arms, one to the bucket and one to the hitch. What I needs is a forth.
  7. M

    Adding Hydraulic Remotes

    I have a 460U with a loader and fast hitch so all the valves are in use. I would like a set of rear remotes for other implements. Can I tee into the hoses just above the cylinder for the hitch if I add shutoffs to the existing cylinder?
  8. M

    340 utility clutch

    When I had these symptoms on my 460 utility, it was the TA clutch - learned this after changing out the engine clutch and not fixing the problem.
  9. M

    Ugly TA Clutch

    Is this how bad these look if the tractor lives out in the weather?
  10. M

    IH 460 utility TA Delete

    Is the output shaft just held in place by a snap ring?
  11. M

    IH 460 utility TA Delete

    Thanks for the thoughts on this - I'm not in a hurry to do a TA delete, I'm just trying to find the lowest cost way to get the tractor shifting. I use it primarily as a loader and the binding problem requires that I slip it out of gear while still moving ( a good trick when trying to take a big...
  12. M

    IH 460 utility TA Delete

    Thanks for this idea when I get it apart again over the weekend I want to have as many options available as possible. I'll show my ignorance of TA's here and ask what may be a dumb question. If I install a TA elimination kit or otherwise disable the planetaries, does the TA clutch have to...
  13. M

    IH 460 utility TA Delete

    I'm wondering if this is what a previous owner has done. The TA lever is missing and I can't adjust the clutch enough to get it to disengage. The problem I'm trying to get past is that I can't shift if I stop the tractor under load. If I just replace the TA clutch would that likely allow...
  14. M

    IH 460 utility TA Delete

    is there a shaft or kit I can purchase to delete the TA from my 1959 460 utility?
  15. M

    460 utility transmission/ final drive binding problems

    Got the cover off over the weekend. TA Clutch looks like it hasn't been released since I was in grade school. Hard to see much through the little cover but throw out looks shot, and cant get enough adjustment out of the linkage to move the forks far enough. Here's my next question - If I...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top