Recent content by MattW85

  1. H

    bean puller

    I'm looking for a used bean pulle. Anyone know where any can be found?
  2. M

    IH B-275 glow plug questions

    I used Bremi brand glowplugs and a glowplug relay for a 7.3 powerstroke when I redid the glowplugs for my B275. It made a world of difference in starting. Bremi are the cheapest glowplugs($14) I found find that would fit. Plus they are the pencil style and self regulating. Here's the link to...
  3. M

    424 decision to make

    Cross Creek tractors has some cheap hydraulic pumps.
  4. M

    B275 3pt lift

    Does the B414 set even move alittle bit?
  5. M

    B275 3pt lift

    Email sent.
  6. M

    B275 3pt lift

    What's your email?
  7. M

    B275 3pt lift

    After work today I'll take a good picture of them.
  8. M

    B275 3pt lift

    Thanks for that picture of how high the arms really go. I called a junk yard and the guy wanted $200+ S&H for a good used set of lift arms. I'll look into seeing if the upper lift arms are installed correctly. Before buying anything else.
  9. M

    B275 3pt lift

    Might have found the problem. I just measured the lift links. The adjustable crank one fully closed is 19-1/4". While the other is 21-1/2" fully closed. So to get the lower arms up to hook up they both need to be 21-1/2". Would 2-1/4" really make a difference? Only one problem with that is. The...
  10. M

    B275 3pt lift

    The B275 doesn't have draft control but it has "depth control". I tried getting it to lift higher on shallow and deeper and it stays the same on either setting.
  11. M

    B275 3pt lift

    Hi, I got a International B275. I'm having a problem with the 3pt hitch. Right the lower lift arms sit on the ground with the 3pt all the way lowered. The problem is that to hook anything I have to raise the 3pt hitch almost 1/2-3/4 the way up to connect the pins. Once hooked up I can only lift...
  12. M

    Power boost IH 424 diesel

    Easiest thing to do is just find a tractor with more hp.
  13. M

    B275 Front axle support

    Hi, Does anybody know where to get a front axle support for a B275 that doesn't cost a arm and a leg? The part number is 706408R5. I found one "locally" for $415. Right now money is pretty tight due to me dropping a 3pt blade on my foot and fracturing a bone and not being able to work...
  14. M

    Bush hog 306

    On Bush Hog's website you can download the manual for your mower It should tell you have to replace the seal. http://www.bushhog.com/uploads/documents/BHRotaryCutter305-306OM-03.pdf
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top