Recent content by mcardinal

  1. M

    New to me MF 135 - need advice on getting it running

    Sounds like the thermostat might be stuck and not opening up? You could pull it out and put it in hot water on your stove to see if it is working correctly or not... This is assuming you have let it run long enough to reach whatever temperature is needed to cause the thermostat to open up.
  2. M

    Massey Ferguson 65 - Aftermarket Front End Modifications?

    I am not changing anything to do with the bolster or front end beam for that matter.
  3. M

    Massey Ferguson 65 - Aftermarket Front End Modifications?

    I checked with a well known local salvage. They are 200$ for a replacement knee. I decided to gamble and ordered a new knee for a 165 at 100$. I believe the main challenge is going to be using the 165's steering arms and adjusting the tie rods and such to fit and still maintain full motion. I...
  4. M

    Massey Ferguson 65 - Aftermarket Front End Modifications?

    Hello all, I have acquired a 1960 Massey Ferguson 65 and have recently started performing various repairs on it. The front end is the worst I have ever seen on an old tractor. Pivot bushings completely worn through, spindle thrust bearings completely gone... the spindles have worn 1/2" or more...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top