MeanGene1's latest activity

  • M
    MeanGene1 replied to the thread 4010 24V SYSTEM.
    There is a Delco 24V single wire alternator that is similar to the common 10SI 12V deal, I have one on my Case 680E
  • M
    I have an N Ford type loader, maybe a Modern? that has a similar bucket, there's another part that just bolts on to complete the bucket...
  • M
    Thanks- I just went out and looked again, there's a little more room than I thought, but still not a lot. I need to spend the effort to...
  • M
    Has anyone done an alternator conversion on a 3414 Diesel? There is not a kit from the site for that one, and the generator is mounted...
  • M
    MeanGene1 replied to the thread Trailer wiring.
    I have learned to just unplug the trailer connector when running a winch or dump trailer pump. It will try to pull power from the truck...
  • M
    If you can get down to the outlet of the tank, you can rig up a loop of fuel line, through a big plastic filter then to an electric...
  • M
    MeanGene1 replied to the thread Big shoulders to turn a M.
    The dairy farmer we used to partner with on hay and oats had a 3020 gasser that we took great joy in embarrassing with out 706D's...
  • M
    MeanGene1 replied to the thread Changing oil.
    I just had to make a couple road trips with the '01 F350 7.3 4x4 dually, so just before I did a service, oil n filter, put the big air...
  • M
    One thing to consider if you want to grade roads- if you don't have good track loader skills, better to get a small dozer. You can make...
  • M
    MeanGene1 replied to the thread O.K. I give up..
    There used to be a local infamous watering hole & grille that a group of about half a dozen of us tended to hit after work to unwind...
  • M
    MeanGene1 replied to the thread 6V vs 12V problems tally sheet.
    Bingo. And I can now keep one spare solenoid for all my Ford stuff, and a Mopar ballast resister that will work on almost anything
  • M
    MeanGene1 replied to the thread 6V vs 12V problems tally sheet.
    Yep, purist vs practical. I switched my 8N and 850- the 850 had been boogered by the previous owner running it 12V neg when it was still...
  • M
    I used to work for a guy who had a K and an L, and had learned to be fanatical about greasing those lower pins twice a day as they lived...
  • M
    Boy howdy on the different tracks- around here we have a few that are pure sand, and with a high HP rig, are a PITA to get moving on. We...
  • M
    When we first got the '63 706D Demonstrator, it was of course turned up a bit, with 18.4-34s loaded and four sets of weights. It was...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top