Recent content by MichaelBeck

  1. M

    Massey Ferguson 135 hydraulics

    Yes, the lift would not raise at times using just the position control lever before the filter and fluid change. You would have to lower and raise the draft control lever along with the position control lever and the lift would start working again.
  2. M

    Massey Ferguson 135 hydraulics

    The fluid level is normal and the fluid and filter was recently changed when the lift started not wanting to raise occasionally. The lift will work at times when first starting the tractor in neutral without engaging the pto but will occasionally not raise an implement during use with just the...
  3. M

    Massey Ferguson 135 hydraulics

    When starting the tractor after it has been sitting a few days, the three point lift will not raise. You can engage the pto and the lift will start working and continue to work after disengaging the pto. Before this started, there was a intermittent problem of the lift not wanting to raise while...
  4. M

    Massey Ferguson 135 hydraulics

    I just realized I had the control levers identified wrong. At times when pushing the position control lever down the implement does not lower unless you push the draft control lever down. The implement will then lower and you can pull the draft control lever back up and it will stay lowered...
  5. M

    Massey Ferguson 135 hydraulics

    I have a Massey Ferguson 135 that the hydraulics just started to not work properly at times but has become more frequent . When pushing the draft control lever down to a preset position, nothing happens until you push the position control lever down and then the implement lowers and stays in the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top