-
M
Differential Pedal, YM2000
For reference. After replacing the fork,the difflock pedal works as to be expected both being depressed and pulled up.- mmckenz-HT
- Post #1
- Forum: Yanmar
-
M
Differential Pedal, YM2000
I think wear in those areas, though severe, could cause the same effect. However I realized since a portion of the radiused arm is broken off, there is not enough material left on the upper portion of the fork to hold the arm against the collar when pushing down. There is still enough of the arm...- mmckenz-HT
- Post #1
- Forum: Yanmar
-
M
Differential Pedal, YM2000
I did end up removing the 3-point unit to look inside the transmission and also jacked it up to get a better feel for the difflock engagement. It does engage but I'm also wondering if the posts on the collar may be worn or rounded a bit? I can't get a good look at the inside of the differential...- mmckenz-HT
- Post #1
- Forum: Yanmar
-
M
Differential Pedal, YM2000
That's a good call Aaron, I will jack the rear end up and check engagement manually. I'm curious to see how that feels though I'm still anticipating opening it up to look at the difflock mechanism for myself since something odd is definitely happening. I've looked at that parts breakdown on the...- mmckenz-HT
- Post #1
- Forum: Yanmar
-
M
Differential Pedal, YM2000
I am having similar issues with my diff lock pedal. I'm assuming I'll need to remove the PTO assembly and see what's going on in there but am hoping to get some clarification on the pedal action first. The pedal is loose with no resistance when pushing down but does feel like it's engaging if I...- mmckenz-HT
- Post #1
- Forum: Yanmar
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy