Recent content by Mo. Elder

  1. M

    49 8N Position Control Lever

    Having issues with three point on 8N not staying in raised position. Have rebuilt pump and replaced relief valve on pump. Replaced piston which was leaking. Will raise to top of lift position then lift begins to lower. I can manipulate the position control lever and can get the left to raise...
  2. M

    Jumping switch on 2n

    Thanks everyone for your help.
  3. M

    Jumping switch on 2n

    Thanks Soundguy. The previous owner had bundled the switch wires with probably light wires and makes it where I can't follow the switch wires without untaping the bundle and maybe creating other problems.
  4. M

    Jumping switch on 2n

    I am second guessing myself as to how to "jump the switch" at the resistor block on a 2n, 6volt. I have been jumping from the bottom pole on the resistor to the pole on the upper right of the resistor (looking at the resistor from the front by the battery). I am assuming if I jumped from the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top