Recent content by Mr.Big346

  1. Mr.Big346

    Firing Order Seems Strange

    Yea I had seen that. I’m fixin to pull the studs once I get them unstuck and clean the whole surface. Also gonna pull the cylinders to check rings, I reckon they need replacing but I’ll have to look into the walls closer. Where are you seeing the scoring on 2 and 3? Just wanna make sure I see...
  2. Mr.Big346

    Firing Order Seems Strange

    Thanks I thought that might be the case y’all have a blessed Christmas
  3. Mr.Big346

    Firing Order Seems Strange

    Hey y’all. My Farmall SA is being fixed righ now and while cranking the engine over with the head removed, the cylinders move 1+4 and 2+3 not 1342. Is something wrong or is where the tractor fires the next cylinder right before it reaches TDC?
  4. Mr.Big346

    Trouble Taking Apart Super A Hydraulic Pump

    Hey y’all, I was fixin to rebuild the hydraulic pump on the Farmall Super A today but can’t seem to get it apart. It looks like there is a nut to loosen on the top of the drive gear but when you turn it, the gear also rotates. Any thoughts would be appreciated because I’d like to get its seals...
  5. Mr.Big346

    Need help finding a Choke-Shaft for a Carter UT Carb: (Farmall SA)

    Yea I was considering doing that just wanted to save a call to see if y’all had some wisdom or knew something I didn’t. Probably will call tmrw and see. From what I’ve seen no supplier just sells the choke shaft on their page, so giving a call couldn’t hurt. Thanks.
  6. Mr.Big346

    Need help finding a Choke-Shaft for a Carter UT Carb: (Farmall SA)

    Hey y’all, me again 😅 Was rebuilding the carburetor yesterday and used a repair kit from Steiner that works well, except it doesn’t supply a choke shaft. It appears that whoever worked on it last JB welded the choke plate to the shaft because one of the screws had broken off in the thread. Also...
  7. Mr.Big346

    Engine Water Block Rust - 1952 Farmall Super A

    That’s what I thought because mine says the same, but yea I guess a stronger cleaner like vinegar or acid could surely remove it.
  8. Mr.Big346

    Engine Water Block Rust - 1952 Farmall Super A

    Thanks. Not sure what I’ll do, but this Super A doesn’t have a water pump or thermostat so that should be less concerning as far as flushing but what I’m trying to gauge is removing that buildup… will that cause internal leaks? Not even sure where I would get a new water block should the current...
  9. Mr.Big346

    Engine Water Block Rust - 1952 Farmall Super A

    Thanks, much appreciated 😉
  10. Mr.Big346

    Engine Water Block Rust - 1952 Farmall Super A

    Hey y’all, just wanted to put this out here to see if y’all know what I should do. Attached are pics of my 53’ Farmall SA’s water block. Just removed the fan and upper hose pipe and the inside walls of the block seem to be full of rust on the walls. Should I be concerned. Nothings leaking just a...
  11. Mr.Big346

    Radiator Repair

    Thanks, your right, I have seen the reviews for new radiators not pretty. I’ll work on the old one. Thanks
  12. Mr.Big346

    Radiator Repair

    Thanks! The block was running straight antifreeze, but it could just be iron stained color over the years and not actual destructive rust. Like I said it’s not a big deal— no leaks :)
  13. Mr.Big346

    Radiator Repair

    Thanks this helps a lot
  14. Mr.Big346

    Radiator Repair

    Hey y’all, I have a 1952 Farmall Super A and I just pulled the radiator in order to replace the fan pulley and assembly. After pulling the radiator I noticed a few things: 1) the fan had cut into the fins at one point (not causing leaks but looks bad for a restoration) 2) the overflow tube that...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top