Recent content by mrgoodall

  1. M

    ford jubilee-governor rod and throttle rod connected to governor arm

    thank you I always appreciate someone like you who takes the time help me out
  2. M

    ford jubilee-governor rod and throttle rod connected to governor arm

    question from a beginner--with engine off, on looking at the 2 rods on the tractor, with the throttle set about mid way between idle and full, and by moving manually the gov arm fwd and back a few inches, that the lower arm will alter the carb butterfly without moving the upper arm. I think...
  3. M

    golden jubilee engine oil circuit

    thank u so much maybe that's why my spin on leaked[the same gasket as canister kit]. will take your advice. one more ques, the plate on engine block with slot on top ----wheh the engine is running , is the slot where oil leaves the filter and canister and then returns to the engine?
  4. M

    golden jubilee engine oil circuit

    thanks John in la I'm sorry that I did not better explain---i get leaks from the can where it meets the engine and the end of the tube - a spin on wont solve this a few years ago I put on a spin on and it leaked so badly that I had to remove it I am going to have boost the big gasket...
  5. M

    golden jubilee engine oil circuit

    ques on the original canister style "can" where the can mounts on engine block there is a rubber gasket about 4" in diam and about 3/8" in breadth inner to outer diam-----i keep injuring this gasket when I mount the can- so I want to make my own gasket--the 3/8 is very flimsy so when I cut...
  6. M

    jubilee generator

    thanks to andy,sotxbill and billy all good info that has sent me on the right tract
  7. M

    jubilee generator

    the number on part is ford OHA-10125 -A. I can't find anything on parts for this model generator. would like to find where i can get field coils on it or find some one who sells generic field coils for it. if i could find some, when ordering i guess i would use diam of casing and length of...
  8. M

    spin on adapter for jubilee

    has anyone had leaks with the adapter? i have. the leak happens between the engine block and backing plate. it seems like the backing plate comes to a knife edge ,too narrow to block seeping oil between plate and rubber gasket. the gasket supplied with the kit is very thin. the gasket is not...
  9. M

    part 54-3200 electric clutch

    thanks- i could not find a rectifier and i thought clutches could be like elec relays which can be ac
  10. M

    part 54-3200 electric clutch

    does any one know if this an ac or dc clutch? thanks
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top