Recent content by Mtynes

  1. M

    1020 John Deere crank not start

    Ok thank you Jim I appreciate your help I will update as soon as i have one
  2. M

    1020 John Deere crank not start

    I do have the service manual and I will be pulling the pump this weekend
  3. M

    1020 John Deere crank not start

    Ok thank you Jim
  4. M

    1020 John Deere crank not start

    Can anyone please advise Thank you
  5. M

    1020 John Deere crank not start

  6. M

    1020 John Deere crank not start

    I pulled the pump plate timing cover off the front of the injector pump. I cranked it over. There’s a pin in there with the spring on the back of it. It’s spinning, but I also took a video of the timing window while I was being cranked and one of those places is supposed to move there’s no...
  7. M

    1020 John Deere crank not start

    OK guys so I did put pressure through the line and it didn’t start trying to force diesel into it. I opened up the timing window and it was full of diesel. I cranked it over nothing in there was moving. It was not spinning at all, so I’m gonna go ahead and assume that this pump is bad. Please...
  8. M

    1020 John Deere crank not start

    Yes, I do have to push the rod in to turn it off. I’m confused at where I run the wire to. I don’t know where to run the wire to after I pulled it off the timing cover. And Is the meter valve inside the pump?
  9. M

    1020 John Deere crank not start

    I’m gonna try to get you in a couple days Jim, but if you could do me a favor and point out the injection pump solenoid location on the body where I hook the wire I’d appreciate it. I have no idea where that solenoid is.
  10. M

    1020 John Deere crank not start

    I also have confirmed that there is fuel being pumped into the injector pump. So my question is has the injector pump failed
  11. M

    1020 John Deere crank not start

    So I towed it today for quite a bit with my truck clutch out in second gear transmission sitting in eighth gear I wanna say maybe a mile and a half and it would not start so I’m kinda at loss as to what exactly is wrong with this thing help if you can.
  12. M

    1020 John Deere crank not start

    The flow from the tank to the filter is good. I can get diesel to come out of the bleed hole on the injector pump. But it just dribbles out but Jim says it won’t come at very fast.
  13. M

    1020 John Deere crank not start

    I did not replace the fuel filter. I did crack the high-pressure lines at loose at the injectors. I did have the throttle to about three-quarter and I’ve been cranking for a bit. I keep having to stop and charge a battery and then I install another battery crank a little bit until the battery...
  14. M

    1020 John Deere crank not start

    Here is a better picture
  15. M

    1020 John Deere crank not start

    Yes to turn the tractor off I need to push the rod in
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top