(800) 853-2651
SHOP NOW

Recent content by muduc

Yesterday's Tractor Forums
  1. M

    New Holland 640 round baler

    I have to get a male connector to add on the baler control box..To mate up to the tractor convenience plug. Right now it just has wishbone spades to fasten on a terminal block.
  2. M

    New Holland 640 round baler

    New Holland monitor plug looks like this...
  3. M

    New Holland 640 round baler

    That's actually in the cab of the Kubota.. Where I will get my power from..The "convenience" plug.
  4. M

    New Holland 640 round baler

    Yes the Kubota does have a convenience plug..On the hunt for the male connector today..So maybe I will just buy 2 sets of connectors..& set the case up identically. Even hard wired..I had the box dismounted from the case tractor in about 15 minutes. It took longer to snip all the...
  5. M

    New Holland 640 round baler

    Good news is, I have added a newer tractor to the hay baling fleet, a nice Kubota M105S, it will serve as my baling tractor, small squares and round. The case 970 will stay on conditioner mower duty. But I wanted to keep the bale command tractor side wiring in place in the 970 and purchase a...
  6. M

    Quiet cab??

    I have a 970 will be at 5000 hours at the end of hay season. Burns oil & gonna need a clutch job..cab & doors are pretty beat up. A/c doesn't work..I looked at a 2090 with loader..it had been given a make over ..nice tractor. I could not believe how quiet & comfortable the cab was compared to...
  7. M

    deal of a lifetime...maybe..

    Ok case boyz, see what ya'll think of this...I had a post last week about a eventually replacing my 970 with a more creature comfort friendly/quieter cab version of mine...this 1370 is not it...but my eyes lit up...thinking buy this...get her running and peddle it to make some extra $$ towards...
  8. M

    970 case...what to do..

    It's funny you say that...if money was no object...I have had daydreams of dropping it off to Agri king or Rod...and giving them my laundry list of to do's and saying call me when it's done...doesn't work that way on this farm...it gets fixed or rebuilt by the sweat of my own brow and my own...
  9. M

    970 case...what to do..

    It is not for sale....yet.. I am located in central Illinois. I would not switch tractors during hay season unless the right deal fell in my lap...budget I am thinking in the $20,000 range plus or minus. mine is a powershift tractor...I should clarify...I said reverser..I mean shuttle shift on...
  10. M

    970 case...what to do..

    Ok boys...I lurk on here a lot and love the wealth of case knowledge...I have gleaned lots of case knowledge from your discussions. Agri Kink Eric has even helped me out a time or two on my 970 pto clutch problem. Here is my question...I am a hay farmer running about 70-80 acres...and growing...
  11. M

    640 tailgate problem

    Yes sir you nailed it...I had pressure on the return side male tip...smacked it on the side of the baler and worked like a charm!
  12. M

    640 tailgate problem

    Problems with the tailgate opening on my NH 640 round baler it is stored in my machine shed all winter...it was blown off completely and oiled the chains and greased it before winter storage...ready to bale some first cut alfalfa...hooked up to my JI Case 970 & pulled out of the barn...flipped...
  13. M

    hay preservative

    No need to worry....no barn is going to burn down here...we are talking 30 bales, and I have them stacked loose on a hay rack sitting under a carport that I use for equipment storage, so they are getting plenty of air flow. The windrows are going to get flipped again today about 11-11:30 and...
  14. M

    hay preservative

    Tonight I was getting everything ready for square baling tomorrow early afternoon and I raked everything this afternoon so I ran the square baler back and forth on the headlands to "open" the field and make sure the baler was tuned in just right. it has just enough moisture in it that its nice...
  15. M

    hydrostatic steering on 180

    I tackled this same problem with mine last winter. You probably have an early production model that has the Saginaw brand hydromotor. I attempted to rebuild mine all new seals and Orings...would put it back together and it would be stuck either turning to the right or left....finally got...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top