(800) 853-2651
SHOP NOW

Recent content by NAllen

Yesterday's Tractor Forums
  1. N

    John Schwiebert need your knowlege

    In what kind of shape are the front pivot pin and axle bore in? What about the spindles? If those pivot points are worn, it will be considerably harder to steer. Nathaniel
  2. N

    Hydraulic fittings on Oliver 550

    Actually, I found this for Dad around 2001. He always fought with it - hard to start, and I dont know the last time the generator worked. Mom gave it to me non-running in 2018. Not knowing any better, I charged the battery and tried to start it. I am VERY thankful that the Bosch...
  3. N

    Hydraulic fittings on Oliver 550

    Im fairly certain this is a factory setup. It matches the images in the parts list. This image shows an angled view from the right side of the tractor, toward the left rear wheel. There is a 45 deg. street ell (pointing down and back) between the valve block and each hose. Nathaniel
  4. N

    Hydraulic fittings on Oliver 550

    No loader, unfortunately - although I still had to make a significant repair to the front end last year. As far as I know, I have an original One-remote factory option. Ill grab a couple pictures after I get home tonight.
  5. N

    Hydraulic fittings on Oliver 550

    Thank you all. I did find a couple of fittings that would maybe mate up, but decided to convert to Pioneer fittings, so that I would not have unique hydraulics. Super99, Ill save the fittings and see what it takes to get to the o-rings. Nathaniel
  6. N

    Hydraulic fittings on Oliver 550

    Apologies - photos were too large and did not load in the original post.
  7. N

    Hydraulic fittings on Oliver 550

    Im working on setting up a remote cylinder on my Oliver 550, but am unfamiliar with these hydraulic fittings. The fittings appear to be plugged from the inside (maybe?), but weep slightly when using the tractor. I see remnants of part number lettering, including the quotation marks, but I...
  8. N

    NAllen again

    E-mail sent. I apologize that I didn’t leave my e-mail open...I had intended to. Nathaniel
  9. N

    Calling Coshoo

    Hello Coshoo, Would you shoot me an e-mail if you dont mind? Ive been wanting to add a loader to my 58 Oliver 550. As I recall, you have (or had) a Freeman 100 loader you mentioned wanting to sell. Thanks, Nathaniel
  10. N

    I bought a Tractor-- MF65 Diesel

    Please do yourself a favor and keep some oil in the P/S pump. Otherwise, eventually this will happen (bottom-middle gear): Thankfully, it was just a couple of gears and the P/S pump to replace on a MF165.
  11. N

    Today's funny

    The potential here is shocking!
  12. N

    Need a Weed Identified

    Hi Bob, Can you pull one of each weed to get a clear image of the plant (against dirt or concrete, maybe?) Is there a milky sap? Are the leaves or stems hairy or glossy? Nathaniel
  13. N

    Be it ever so humble....

    That is known as the Leonard Barn, and was built in 1917. I drive by it occasionally. http://www.leonardroundbarn.com/ There is a video at the link that shows some of the interior. Nathaniel
  14. N

    Need a Weed Identified

    Hi Bob, Can you pull one of each weed to get a clear image of the plant (against dirt or concrete, maybe?) Is there a milky sap? Are the leaves or stems hairy or glossy? Nathaniel
  15. N

    Graphite Rods and Brazing

    I didn't see any 1-3/8" graphite rods at the link... Last year, I begged some milling machine time from a friend and did this to my Oliver 550 adjustable front axle. I used two bushings end-to-end in the bore (1-1/2 OD x 1-3/8ID).
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top