Recent content by Nashty1

  1. N

    Massey Ferguson 150

    Thanks
  2. N

    Massey Ferguson 150

    Looking to buy 235 Loader
  3. N

    Massey Ferguson 150

    Looking to buy used but good Massey Ferguson 235 Loader
  4. N

    Ole Fergy

    Thanks ..
  5. N

    Ole Fergy

    Thanks Bob, I didn't think it was right from what I had read, gonna go trade it out tomorrow.
  6. N

    Ole Fergy

    Thanks , "ole fergy" came from when I posted about my T-20 Ferguson I was working on . I didn't think 85W140 was right according to what I had read, that's just what the store had sent .. thanks again...
  7. N

    Ole Fergy

    I was told a C-1 fluid & not to use a C-5 because of it's age ? I told the guy what I was doing and that's what he sent, just wonder if it's too thin/thick or the wrong thing in general ..
  8. N

    Ole Fergy

    I ordered trans oil for my 150 MF and was sent 85w 140 EP gear oil (CL-5), is this what I need ? Already drained oil, ready to refill , Please advise ..
  9. N

    Ole Fergy

    Middle link was pushed in just enough, I took the drag links off and must have pushed it in when I was working on it. Thanks..
  10. N

    Ole Fergy

    I pulled lift arms up to work around, now they wont come down regardless of handle position .... Help please ?
  11. N

    Ole Fergy

    I sprayed gas through the plug holes but it would only bark on the ether. bad part is, I saw the crack in the gasket/spacer and used it anyway .
  12. N

    Ole Fergy

    Ole Fergy runs !, Thanks for all the help and comments .. Turns out the intake gasket to the carburetor had a severe leak and not allowing gas to get into the intake and why it would only hit with starting fluid . I had checked the timing again & again to be sure, I had gas to the carb and a...
  13. N

    Ford 8n - Backfire / Misfire

    As Bruce(12) commented, I had a coil , when it got hot would act this way & when cooled it would fire right back off again .
  14. N

    Ole Fergy

    Thanks to you & rustred , It's close.... mine is a TO-20, the flywheel dose not have a hole, just marks from 30 to DC & timing mark groove on hole under starter ( I even removed starter to be sure) It's firing @ 7o BTDC, , rotor points @#1 , good blue spark at plugs, good gas flow , even sprayed...
  15. N

    Ole Fergy

    I think dist. is a tooth off, noticed the rotor & #1 on cap were off just enough, which would cause my backfire, I do have gas flow & it spit. I beginning to think maybe my son in law or myself had to have removed the dist. when replacing starter? I fixing to make sure .....
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top