Recent content by NineSixtyOne

  1. N

    8N For Sale--Kansas City Area

    Nice looking Machine.
  2. N

    It worked!

    Nice Machine, Nice Place, Nice garden, Nice day, Nice view.
  3. N

    52 8N fan belt replacement?

    Please correct me if I am wrong but replacing the fan belt with the engine off will also keep the engine from overheating. HTH!
  4. N

    Ford golden jubilee

    Ditto on the front end wobble. Get there and back home safely, enjoy the day.
  5. N

    Help a spare part!

    For what it's worth. I recently used JMOR's method of removing the valve seat from my lift cover and it worked quite well. However, the threads on my valve seat were 3/8-24. Not 5/16-24. If that is a typo please disregard. I suggest you ensure you use the correct size and thread.
  6. N

    59 961 Hyd Lift Cover Rebuild Guidance Request

    JMOR, successfully pulled the valve seat. Again, Thank you! I have turned my attention to O-rings in the Hyd. cylinder assy. Question: Do you, or anyone else, have any words of wisdom for pulling the unloading valve? If I understand correctly it appears that the threads on the unloading valve...
  7. N

    Garden prep

    You have a very nice machine.
  8. N

    59 961 Hyd Lift Cover Rebuild Guidance Request

    Agreed! Just think. I may be racing towards a catastrophe. High risk/High reward.
  9. N

    59 961 Hyd Lift Cover Rebuild Guidance Request

    See JMOR! This is why you get paid the big bucks! ;) Thank you for the picture. I will begin scrounging up the materials to make a puller ASAP. Can you please give me the size of the bolt you used? It looks as if you added more threads with a die. I can do that also. Is it 1/4-28? To be fair...
  10. N

    59 961 Hyd Lift Cover Rebuild Guidance Request

    The Bobbing or hiccupping description in the books most closely describes my hyd. problem. If the hyd. picks up anything they bleed back down and you can watch the lift arms bobbing up and down. Fluid is leaking around the piston. When I removed the piston the leather seal was not there only...
  11. N

    59 961 Hyd Lift Cover Rebuild Guidance Request

    Gentlemen, got a 1959 Ford 961 Diesel. My hydraulics suck. Bought a Lift Cover Gasket/O-ring kit from YT. The area of interest is: Specifically, Ford Shop Manual page 389, 3. Lift Cover, B. Disassembly, Paragraph 3 Or, FO-20, page 126, Paragraph 313 Here are my questions: Since I do not have...
  12. N

    Might be a good buy

    I agree, it might be a good buy. Nice looking machine.
  13. N

    951 vs. stump

    Beautiful Machine.
  14. N

    51 8N No Spark Guidance Request

    TOH, Today, I removed the Pertronix ignitor. Installed the points and condenser. The machine started immediately, runs good. Mowed for about 4-1/2 hours today. Previously, the EI ignitor was installed correctly as per the telephone instructions from their Tech dept. The machine started good...
  15. N

    51 8N No Spark Guidance Request

    We're zeroing in. I think it's possibly safe to say the suppression wires I used are not the problem. Appreciate your patience.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top