(800) 853-2651
SHOP NOW

Recent content by Northeaster

Yesterday's Tractor Forums
  1. N

    replacement ignition switch for briggs & Stratton on old Bolens 943 frame steer

    New magneto and switch in and seems to be working fine.. thanks for all of the advice!
  2. N

    replacement ignition switch for briggs & Stratton on old Bolens 943 frame steer

    i did check with a good meter but don't remember the numbers.. I watched a couple of videos on how to check/meter a coil - it passed one of the test but on the other it was near zero/very low resistance . I will compare the new one to old once I get it.
  3. N

    replacement ignition switch for briggs & Stratton on old Bolens 943 frame steer

    thanks for the help Folks.. the fuse did its job a few times... but dense as I am, I kept trying as I wasn't sure what was causing it... and when I tested the coil, as part of troubleshooting with an ohmmeter I found that I had no resistance from the coil wire to ground... and figured that was...
  4. N

    replacement ignition switch for briggs & Stratton on old Bolens 943 frame steer

    Hi Folks - I think i made a mistake.. had to replace the ignition switch for the briggs & Stratton on our 1985 Bolens 943 frame steer so i went to napa and bought a generic switch.. after blowing many fuses and watching some videos i believe the one i bought is putting 12v to the coil when i...
  5. N

    advice please on leak near right lower lift pin - Ford 2N

    No, we are not in a rush - just a project for my son, myself and father-in-law and we have a nice shop to leave it in... so I think it will be next to pull it apart and see what we break...need to buy..
  6. N

    advice please on leak near right lower lift pin - Ford 2N

    Thanks to all for the explanations and detailed pics, helps a lot. I also just watched a YouTube video by Jason1PA where he takes it all apart and I got a good appreciation for what is involved. now, do I order gaskets now for the pin and differential housing... our wait and see what else I...
  7. N

    advice please on leak near right lower lift pin - Ford 2N

    ok, i had read that the 8N pin was tappered but that the 2N and 9N were straight.. so I wasn't sure what kept the oil from leaking out.
  8. N

    advice please on leak near right lower lift pin - Ford 2N

    thanks Shaun! is there an oil seal or bushing of some sort around the pin that should be replaced?
  9. N

    advice please on leak near right lower lift pin - Ford 2N

    pic
  10. N

    advice please on leak near right lower lift pin - Ford 2N

    Hi Folks - I have read a few older threads on how to tighten tor replace he lower lift arm pin, but I want to make sure that this is likely the issue. I have a small leak and it is hard to tell if it comes from around the pin itself, or more likely from around the small cover (someone please...
  11. N

    Help please identifying needed 2N throttle parts

    Good news. The PO was able to find a parts tractor so I bought the old steering column, which included the Throttle rods I needed plus the oil bath air cleaner and the original battery tray (has some rust/ swelling but i can clean it up and weld a new piece in). Even though my customer battery...
  12. N

    Help please identifying needed 2N throttle parts

    Good news. The PO was able to find a parts tractor so I bought the old steering column, which included the Throttle rods I needed plus the oil bath air cleaner and the original battery tray (has some rust/ swelling but i can clean it up and weld a new piece in). Even though my customer battery...
  13. N

    Help please identifying needed 2N throttle parts

    Hi Soaked - thank you for all of the pics and parts numbers. if i cant make my custom battery tray work I will order one from YT,. As you provided me with the part number 2N 9802, I see there is one used on line for sale. If the PO doesn't find the parts soon, i will order the used one. And...
  14. N

    Help please identifying needed 2N throttle parts

    Our tractor was converted to 12V before we got it, so i just threw in and old truck battery i had laying around and it seems to turn it well enough. I bolted the new tray I built in securely with one bolt on the top of the flywheel area and two smaller bolts above the starter switch on the...
  15. N

    Help please identifying needed 2N throttle parts

    HCooke- Thanks for looking for the choke rod, I am hoping the guy I brought it from may be able to find some of these parts in the next couple of weeks..but if not, I would be interested. Mad Farmer - thanks again for taking the pics - that makes alot more sense to pass the control arm through...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top