Recent content by notebook

  1. N

    Hydraulic valves

    It is leaking out of the front of the spools. Not sure how much of a job it will be but I would like to do it right.
  2. N

    Hydraulic valves

    I have a 165 massey and the hydraulic valve block is leaking really bad do they sell a rebuild kit for it? I have attached a photo of the valve block.
  3. N

    Vac throw out bearing

    Thank you very much! Saeli had the right seal that I needed and also helped to make sure the throw out bearing was right too. Really nice guy to deal with.
  4. N

    Vac throw out bearing

    Been helping a friend work on his 1956 vac. It had a bad throw out bearing and we got it apart ordered the bearing and seal for the assembly. Bearing is good but the seal is wrong dealer says that is the only one they have for it. Is there a different part number we could use for the seal...
  5. N

    power steering

    Put in outside in the cold for 2 hours then used a small 2 ton press at the neighbors place and it came right out.
  6. N

    power steering

    I managed to get the pin out Thank You guys for your help.
  7. N

    power steering

    Here is a picture of the end of the cylinder facing you
  8. N

    power steering

    I am not sure the way it looks it should be forced down but I used a big hammer and punch but it didn't do anything I hit it from the other side with same result.
  9. N

    power steering

    I have a Massey Ferguson 150 Diesel and I took the power steering cylinder off because it is leaking really bad everything went well until I tried to take the pivot pin out on the one end finally ended up taking the whole piece off along with the cylinder how do you get the pin out tapped on it...
  10. N

    Oil Pressure on my 150

    I have a Massey Ferguson 150 with a diesel engine ever since I have owned it going on 5 years now the oil pressure gauge would peg out at max PSI so I finally got a new gauge and replaced it I still have the same problem the gauge pegs out at max pressure even at an idle. Any suggestions as to...
  11. N

    150 exhaust

    I looked on the web site and have looked on other site but they don't seem to have the part that comes off the manifold and goes down. I talked to a local muffler shop and he said to bring the tractor there and he might be able to build one the only part that he was not sure about was connecting...
  12. N

    150 exhaust

    Got a big problem with my 150 with a diesel motor, it has a home made exhaust coming off the manifold and is falling apart I am trying to return it to the under slung exhaust but after talking with the local MF dealer the parts are not available anymore and they have no after market parts. I...
  13. N

    Childhood

    I live here in Northwestern PA and the other day I decided to take my 2 young girls to the farm where I Grew up I know the people that own the place and they still farm it and have bought out 2 other farms and really expanded the original farm I took them for a walk and really let them run down...
  14. N

    Who I used to be

    I was in the Seabees. I was at boot camp 10 days after graduation Dad was smiling from ear to ear did not want me to farm or drive truck. I was only going to do 3 years then 3 in the reserves but uncle sam offered me a good deal and Dad sold the farm after I joined so I said what the heck lets...
  15. N

    Who I used to be

    Was sitting here this morning drinking coffee reading about the 40 years together and such and it got me thinking about who I used to be. I was in the military for 20 years and when I left I had 123 personnel working for me I managed right around 200 pieces of heavy construction equipment...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top