Recent content by OB OBrien

  1. O

    Planters for vegetable crops

    Do you still have the Cole 12 MX fertilizer distributor? If so please call me at 850-572-two one eight two thanks OB OBrien
  2. O

    Need help with my Farmall 140

    Yes Hal; I can depress the clutch. My neighbor built a platform with steps and railings for me to get up on the tractor. Once I get up on it, I can drive/operate it. I'm just have a problem figuring out how to attach all the various attachments to it. I have the planter and fertilizer...
  3. O

    Need help with my Farmall 140

    Hello, I need some help please. Problem is I'm a city boy and also handicapped and temporarily stuck in a power wheelchair. I live in Pace Florida, thats near Pensacola. I have a Farmall 140 and all sorts of attachments. Have a Blackland runner planter and all the discs, plus all sorts of...
  4. O

    Farmall 100

    Hi Hugh; Can you send me some pictures of your 3 point conversion kit for a Farmall 140? Mine used to have a single point hitch but it is no longer available. The hydraulics are there, both of them and are working fine. I Have a planter a fertilizer distributor on it now. I want to be able...
  5. O

    need Pictures of Planter and Runner Setup on Super A - 140

    Yes! you got right. I have had to lower mine, then tighten then raise it and shake it then tighten it a couple of times before it's really tight. In your last series of pictures, the last one and the next to last, you show a blue planter driver with a red center. It's the one that bolts on...
  6. O

    need Pictures of Planter and Runner Setup on Super A - 140

    Don't know about the drop tubes. Maybe the Case dealer.
  7. O

    need Pictures of Planter and Runner Setup on Super A - 140

    1. The two blue clamps in the 4th picture down, slide onto the square bar in your 3rd picture with the large nuts facing up. Those fit into and slide back into the keyhole holes on your cultivator lift bars. The blue assys lock into the diamond shaped part of the lift assy. 2. The extra...
  8. O

    need Pictures of Planter and Runner Setup on Super A - 140

    ep gave you some good info. Here are some pictures to show you how it's hooked up on my 140. 1st Photo is a side view. Following the drive chain from the 13 tooth gear on the left drive under the axle. they are; next one, 8 teeth then 7 teeth, then 12 then 8 and the last one drives the fert...
  9. O

    Need a wiring diagram for a 140

    Need a wiring diagram for a Farmall 140. It's a 1956 with a 12 volt conversion and a voltage regulator. Have found some wires disconnected and don't know where they go. One of the wires goes to the "L" connection point on the voltage regulator. I think the other end goes to somewhere on the...
  10. O

    Reveal of the 1976 Farmall 140 that caught on fire - PICS

    WOW what an incredible re-build. You did a great job. Congratulations, that lady will be proud of her new tractor. ob
  11. O

    Farmall 140 electrical

    Another question about farmall wiring. Have a 1956 Farmall 140 with a 12 volt system. Found a wire behind the instrument panel that was disconnected. According to the wiring diagram its labeled number 10 and should be connected between the "L" terminal of the voltage regulator and a terminal...
  12. O

    Which type Farmall tractor do these Planter Runners fit???

    They are both 184 runner planters. They will work on a 100 or a 140 for sure. Maybe other tractors in that size.
  13. O

    AP article in today's paper about older tractor Roll-over...

    Hey Zooey. If you follow the link you supplied and click on the other links it will take you to a page to find a roll bar for your tractor. I did and found one for my Farmall 140.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top