Recent content by OldMassey44

  1. O

    Log splitter running hot

    I'm tempted to play with the pressure relief setting but I might wait to hear what you guys have to say first
  2. O

    Log splitter running hot

    I also replaced the relief valve orings, the backer ring crumbled apart and the oring looked like it hadn't been sealing completely
  3. O

    Log splitter running hot

    I know it's been a while, lots of projects going on before winter hits but I finally installed a pressure gauge between the pump and valve, when the ram is fully extended and held, if I balance the valve handle to keep the engine from stalling I see at most 500psi on the gauge. I also installed...
  4. O

    Log splitter running hot

    Used the splitter all day yesterday, must have been above 30 Celsius outside and the oil reached 220F. Cylinder started leaking at the rod more and pump sounds like it cavitates once oil is warm. Pump is quite when oil is cold, pump is quite when valve is in action in either direction once...
  5. O

    Log splitter running hot

    No pressure gauge yet, the tank, pump and valve all drained into a 5 gallon bucket but the hydraulic cylinder was still full so It's gotta be under 6 gallons for the whole system
  6. O

    Log splitter running hot

    Here's a link to a different post I started awhile ago trying to figure out what pump this could be. Still haven't figured it out https://forums.yesterdaystractors.com/threads/what-pump-is-this.1782041/#post-11690109
  7. O

    Log splitter running hot

    How many gallons of fluid would be enough for this pump? I could always keep an eye out for a bigger tank or one to add onto this one to make it bigger
  8. O

    Log splitter running hot

    I took the pump and tank off along with the valve and rinsed it out with gas and some fresh oil, the fluid was full of small shiny metal particles. There's evidence of the person that built this that when they cut piping between the pump and tank that they didn't bother to de-bur anything so I...
  9. O

    Log splitter running hot

    I don't believe this is a closed center plug. I will install a pressure gauge once I have a chance to pick one up
  10. O

    Log splitter running hot

    Okay I'll look into doing all that and get back to you
  11. O

    Log splitter running hot

    https://www.surpluscenter.com/Hydraulics/Hydraulic-Valves/Directional-Control-Valves/1-Spool-30-GPM-Double-Acting-Directional-Valve-Cross-Mfg-131135-BA11AG3EA0-SBA2-9-16453.axd This looks almost identical, might be an updated model of the valve?
  12. O

    Log splitter running hot

    Where would you recommend installing the gauge?
  13. O

    Log splitter running hot

    I will get one the next time I'm in the city, pump is plumbed to the "in" port of the valve.
  14. O

    Log splitter running hot

    The brand is cross but I don't see any model numbers. I tried searching around online but I can't find specifics on any cross products that would help me figure out any information on the valve
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top