(800) 853-2651
SHOP NOW

Recent content by pembinapasture

Yesterday's Tractor Forums
  1. P

    1066 Hydraulic pressure bleeding off

    So the valve rest up against it, or slide into it? I’ll go check my manual. Thanks
  2. P

    1066 Hydraulic pressure bleeding off

    I went looking for the problem when the tractor was struggling to lift the discbine and won’t turn the hay bale in the hay processor when it had the winter before. The pressure relief valve is probably the easiest and cheapest option to start with. The salvage place has used one for a decent...
  3. P

    1066 Hydraulic pressure bleeding off

    The numbers were at temperature and the rpm’s in the middle of the range 1500 rpm +\- . The tests are on the main hitch pump ( the 1066 has two pumps the mcv and hitch pump) and there is no 3pt on this tractor. I have pulled the pump before the test and I have put new orings and gaskets in as I...
  4. P

    1066 Hydraulic pressure bleeding off

    Good Evening All, iCloud Photos - Apple iCloud (video of pressure test at back outlets) I have a 1066 that the hydraulic pressure will start at 2000 psi then bleed off to 1500 psi even when the valve is open. Just wondering where to start with more testing. Is it a pressure relief valve issue...
  5. P

    Vicon Rp1511E

    Good Day, I’m looking for a cab monitored for a cocoon rp1511e soft core baler, or at least a picture of one. I know these bakers were made by PMI and there is multiple companies that used pretty much the same design so there is a change that other soft core bakers of that vintage may have a...
  6. P

    Calling All David Brown 3 pt hitch experts

    https://1drv.ms/u/s!Ai_EFVTH2PxYg_RaaDsQp07PPgGFNg?e=ubd3S3 Pictures
  7. P

    Calling All David Brown 3 pt hitch experts

    Hello, I have a '64 David Brown 990a implematic that the 3 pt hitch doesn't work. Or should I say I can raise and lower it through the override control( second picture and fourth picture) on the back of the tractor, but have no control over it with the lever. It seems as if the valve is...
  8. P

    John Deere 1525 haybine plugging

    Some where around 3-3.5 mph. It’s 2nd gear low on my 1066.
  9. P

    John Deere 1525 haybine plugging

    Hello everyone. I have a John Deere 1525 haybine that keeps plugging in thick grass hay. Cuts good then plugs as it goes through the rollers. I have opened the gap between the rollers and the tension on the spring is near the middle. Now the hay is damp and thick but I figure it should...
  10. P

    Hyd, clutch adjustment on 1066 international

    So what happens if the linkage between the clutch pedal and the booster is out of adjustment? Does that cuclinder need to be in a certain position?
  11. P

    Hyd, clutch adjustment on 1066 international

    Good afternoon everyone, I have an international 1066 that is in need of a clutch adjustment. Little back story, I have had multiple issues with the MVC pump and the main hyd. pump, and have replaced the MVC pump and everything works as it should other then the clutch. When I removed the MVC...
  12. P

    International 1066, Hydrualics sucking Air

    Thanks Pete 23, You read the whole post and gave me some new ideas of the possible issue. I pull the filter housing and added some sealant but with no effect. I then took the filer and screen out and it?s has seem to cure the issue. Since I?m new to this tractor I?m wondering if I was given...
  13. P

    International 1066, Hydrualics sucking Air

    one more question for you all. Where do you test the pressure on the MVC pump?
  14. P

    International 1066, Hydrualics sucking Air

    OK I'll try that, since that seems to be the consensus in everything you guys are saying. Is there a point where its overfull? Does that answer why the main pump is sucking air as well. Or is it the MVC pump sucking air and foaming the oil causing the mains issues? Does anyone know how much...
  15. P

    International 1066, Hydrualics sucking Air

    So 24-25 gallons isn't enough? DO you guys put closer to 30 gallons in these?
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top