(800) 853-2651
SHOP NOW

Recent content by Ranbo

Yesterday's Tractor Forums
  1. R

    Farmal 656 cam gear removal

    Found another set of numbers, 1 13B L2 I'm assuming that the L2 means 1965, based on a table I found....any clue as to the 1 and the 13B, or is there something else I'm going to find?
  2. R

    Farmal 656 cam gear removal

    Need some help to determine what year/size of engine from the casting number. Cast # is 532880R1... Engine does not have sleeves, and was expecting it to have them so kind of curious to what I have here..... Thanks
  3. R

    Farmal 656 cam gear removal

    Took the bolts out behind the gear and the cam popped right out..... Thanks for the assistance, I'm sure I'll be posting again, this is my first rebuild......If it all does not go back together, I'll have a pile of parts.... :-)
  4. R

    Farmal 656 cam gear removal

    OK, thank you both for your info, I'll see what I can do and respond back to this thread.
  5. R

    Farmal 656 cam gear removal

    Finally tore into my c263 and am having problems getting the cam gear off. There is not a good lip for the gear puller to catch on, anyone have any tips/tricks to get it off? Also, I thought these engines had sleeves, this one looks like it does not have them....I have heard the combine...
  6. R

    8n not cranking

    Thanks for all the assistance, it ended up being the ground cable, it was burnt almost in half.....Put a new one on and it fired right up....
  7. R

    8n not cranking

    Checked the braided ground cable, almost dissolved in-half from the scale. Going to try a new one and see if that helps..traced the wiring as far as I could in the dark, took the battery off this morning and saw the cable...charging while I get another cable and I'll update....
  8. R

    8n not cranking

    PTO does not turn over when the clutch is in....Thought maybe the extra load might have fried something in the harness..checked switch, good, checked starter button, good, probe on battery to top of rotor cap good...
  9. R

    8n not cranking

    Was not in gear, just did not have the clutch in and the PTO was engaged with a grain cart hooked up to the back.
  10. R

    8n not cranking

    Got a old front distributor 8n, pulled a bonehead mistake. Cranked it with the PTO engaged and forgot I had the grain wagon on the back. Cranked it a couple times before I realized what was going on, heard a crackle up by the starter solenoid region and now it won't do anything. Did I fry...
  11. R

    Long 2096

    The ones on the cutter now do not have any ribs, they are just round. I see the ones in the picture with the angle iron on the outside, is this what you are talking about? I would see this helping force the cut hay into the center of the mower, and not falling to the outside.
  12. R

    Long 2096

    The dealer here told me the same thing, that he had only sold 1 or 2 the whole time they had them. I'm going to make something out of a 12" pvc pipe, might be a hair too wide, but we'll see how it works......
  13. R

    Long 2096

    Yes, these are molded plastic or fiberglass. Have not been able to find any under any name of mower. If you have a link I would appreciate it. Getty ready to "fabricate" something
  14. R

    Long 2096

    Looking for what I think they call a "hat" that sits on the inside and outside mower blade. Anyone know where I can get a couple of these?
  15. R

    Siezed engine

    What is the torque specs on a C263 (656) crank saddle bolts? Thanks
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top