Recent content by rderrick121

  1. R

    Case 222 PTO/log splitter/3 point

    Hello case nutty, so what do I do next? Where can I find the 3 point kit would be the next logical step in my mind while keeping an eye out for a splitter.. any tips on getting a 3 point rigged up? I forgot to tell you my tractor came with the manual lift not hydraulic.
  2. R

    Case 222 PTO/log splitter/3 point

    This guy seems to have a 3 point log splitter on a garden tractor? https://youtu.be/xix9DnpesFk I see lots of people doing 3 points on the 222s
  3. R

    Case 222 PTO/log splitter/3 point

    Hello All, I have been getting my old case 222 going here and I would like to add a log splitter if possible. Would I have to get a 3point setup to do so? Is there a 3 point kit or any step by step guides that can help me if so? How would I plum in the splitter? Should I just get a new...
  4. R

    case 222 deck raise/lower non hydraulic

    Hello All, I added some tie wire to the top of the lift links (bolts were too much) which shortened them. Now when the cutting deck is in the lowest position the back wheels are a good 2 inches off the ground. In the highest position they lightly touch. Thank you, I will keep my eye out for a...
  5. R

    case 222 deck raise/lower non hydraulic

    Hi Case Nutty, I have lowered the cutting height pin the the lowest pin and they still touch the ground. It's only when I pull back and hold back they slightly lift off. When I allow the lever to travel forward a bit into the locked position they are back on the ground. I am gonna try...
  6. R

    case 222 deck raise/lower non hydraulic

    Hello case nutty and Steve, I have leveled the deck read the manual and still when I pull back into transport position the back wheels do not come off when it’s locked into transport. If I pull on it and hold it back the back wheels will slightly come off the ground, like a quarter inch... I...
  7. R

    case 222 deck raise/lower non hydraulic

    Hello, my case 222 is not equipped with the hydraulic lift lever to the right of the steering column. Instead I have a vertical bar with a button on top to transport/mow with the deck that you manually pull back to you to transport or release forward to mow. Doing so really doesn't change much...
  8. R

    Case 222 Charging issue

    Hello Fixerupper, I first checked the battery voltage, which was just the regular 12.7-13 volts then checked while running (throttle to mid/high) and it would mainly keep bouncing back to around 12.7 but fluctuate all over the place, from 0v-13v. I then grounded the f terminal on the starter...
  9. R

    Case 222 Charging issue

    Hello all, I am new to the form and seeking guidance to an issue I am having with a case 222 garden tractor that has been gifted to me. Mowing season is coming up and I intend to use the mover to cut my grass and pull a little 3x5 garden trailer. My issue is that the battery is not charging, my...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top