Recent content by Red Dog

  1. R

    140 gearbox and PTO oil amounts

    I kinda thought that, but it still is annoying that it does that. Would adjusting the clutch help ya think, or just open another can of worms?:)
  2. R

    140 gearbox and PTO oil amounts

    Hi, Thanks. Not sure what you mean. Do you mean hold the shifter to the side?
  3. R

    140 gearbox and PTO oil amounts

    I understand. Thanks. Also I noticed this one two different 140's. If the right angle drive is removed, the shifter grinds a little putting the tractors in gear. Is this common or why does it happen? Do I need to adjust the clutches when removing a right ngle drive. Both tractors want to grind...
  4. R

    140 gearbox and PTO oil amounts

    My manual says 4 quarts of fluild in my tranny on my 140 and 5 quarts if right angle PTO is on there. My question is this. I want to flush and change the fluids in the gear box and side angle PTO. The side angle PTO has a drain and filler as the tranny box does. So does this mean that 4 quarts...
  5. R

    Farmall 140 Hydraulic oil mystery

    Thanks Sam. I change the engine oil regular in the 140 and it does take some time for the hydro tank to get low. Can I just leave it alone without causing any harm and just fill the hydro tank when I need to? I don't like playing around with the solid hydro lines on these Farmalls at all.
  6. R

    Farmall 140 losing hydraulic oil

    I had a Farmall cub that used to leak hydraulic oil into the engine oil because of bad o-rings at the pump. My 140 hydraulic tank is running dry over time and I do not see any external leaks. Does the 140 suffer from the same o-ring problem as my Cub did. Can it be possible that my 140 hydraulic...
  7. R

    Farmall 140 Hydraulic oil mystery

    I had a Farmall cub that used to leak hydraulic oil into the engine oil because of bad o-rings at the pump. My 140 hydraulic tank is running try over time and I do not see any external leaks. Does the 140 suffer from the same o-ring problem as my Cub did. Can it be possible that my 140 hydraulic...
  8. R

    Farmall A clutch and PTO problem

    Could the ckutch be frozen also from lack of use? Starting it in gear maybe to jar it? Sprat with penatrating oil if I can get some up there? I want to think the clutch is frozen to the pressure plate. I hope not. Another way is to put the darn PTO back in? I can't use it anyway as the 140 outer...
  9. R

    Farmall A clutch and PTO problem

    Thanks. It absolutely does not spin down. Ever. Spins away as though the clutch is not even there. Could the clutch be frozen with rust as I am thinking now? Seems like a coincedence that just removing the PTO would aloow this. I am not talking that it grinds going into gear, I am talking it...
  10. R

    Farmall A clutch and PTO problem

    I just pulled a PTO off a Farmall A to use on my 140. Of course after I did that I found it won"t work because the A"s outer sleeve and probably something else is not the same as the 140. I put a back plate on the A and refilled with oil. Anyway, the problem now is that without the PTO in there...
  11. R

    Hydraulic to Rockshaft Arm FARMALL 140

    Thanks. I was hoping to find a used one but I may just buy one from the vendor you provided if I don't get any list results in a week or two. thanks again.
  12. R

    Hydraulic to Rockshaft Arm FARMALL 140

    I am looking for a rocksaft arm to go on a 140. Facing the tractor on the right side, running from the hysraulic arm to the actual shaft to lift implements with a 3 point type hitch I want to try and fabricate. Can anybody tell me where I might get one or does anyone have one for sale? Thanks-John
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top