Recent content by redspud

  1. R

    530 CK axle questions

    I'm trying to replace the front axle on a 530 CK. I"ve been told to jack near the transmission to take the weight off the axle and the big pivot pin will slide right out. I have done that and removed the bolt that holds the pin in place. I can't budge the pin. Does the pin slide forward or...
  2. R

    8N PTO troubles

    Thanks for all the input. Today I heard back from Davis Tractor Parts and was told that the hole through the shaft to accomodate the spring pin for the ORC should be 5/8" from the end of the shaft to the center of the hole. Well, mine measures 1 1/8", which would explain why I can"t get the...
  3. R

    8N PTO troubles

    I"ve found a lot of knowledge in these forums and I"m hoping I can get more help with an issue I am having. The machine is a 48 8N and I elected to acquire a conversion PTO shaft to cure the adapter issue and correct some leaking seals. The conversion shaft went in fine, or so I thought. When...
  4. R

    Illegal Hunters?

    On Thanksgiving Day I happened upon some coon sets on my posted property. This was in Huron County in Ohio. Upon leaving word with the local WCO, he got back with me and asked me to meet him at the property. Josh took my complaint seriously and I found him to be genuinely concerned about this...
  5. R

    New to YT and to Case

    Thanks Genos How can you tell when you have added enough hydo fluid to the reservoir for the hoe and loader? The manual for the model 32 says to remove a pipe plug, but the 31 does not have a pipe plug in the location that the manual says for the 32. Any help from anyone is appreciated. Thank you
  6. R

    New to YT and to Case

    Thank You VCguy. I was at TSC yesterday and could only buy a universal hydraulic fluid, but it says that it is recommended for use were TCH is specified. Would this also be aceptable for the power steering reservoir? I am thinking that it should be, but will wait for an expert's opinion.
  7. R

    New to YT and to Case

    Thanks for all the responses. I'm looking forward to tapping into this resource for forthcoming issues. I worked on the 530 again today and will soon be ready to see how it works. I've learned a lot today. I learned that I should have invested in PB Blaster stock. One can usually lasts me...
  8. R

    New to YT and to Case

    I"m new to this forum and to Case. I"ve spent a lot of hours on Fords, JD, IH, MM & AC. I hope my recent acquisition of a 530 CK doesn"t turn into a money pit. For some unexplained reason I felt the need to own a backhoe. I live on 4 acres and own 5 tractors, 3 of which actually are...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top