-
R
Oliver 1650 Hydraulic noise/temp?
Update…. I saw that one of the hydraulic levers would stick slightly and not return to neutral. I removed the top cover, cleaned all the crud out of the resovoir pan, and removed the hydraulic valve/piston(?) from the suspected troublesome side. Nothing obviously wrong with it, but I lubed it...- RLTW
- Post #12
- Forum: Oliver, Cletrac, Co-op and Cockshutt
-
R
Oliver 1650 Hydraulic noise/temp?
Fluid level stays constant, the steering never changes.- RLTW
- Post #8
- Forum: Oliver, Cletrac, Co-op and Cockshutt
-
R
Oliver 1650 Hydraulic noise/temp?
I don’t have much history. I bought it from a neighbor who parked it with fuel issues. I got it running and am just driving it around the barnyard. Could have had a bad hyd pump when he parked it too for all I know. I’ve never been around any other Olivers to know what’s “normal”.- RLTW
- Post #7
- Forum: Oliver, Cletrac, Co-op and Cockshutt
-
R
Oliver 1650 Hydraulic noise/temp?
Yes, new filter.- RLTW
- Post #5
- Forum: Oliver, Cletrac, Co-op and Cockshutt
-
R
Oliver 1650 Hydraulic noise/temp?
Seems to stay constant when I mess with the 3 point.- RLTW
- Post #3
- Forum: Oliver, Cletrac, Co-op and Cockshutt
-
R
Oliver 1650 Hydraulic noise/temp?
I’ve got another question on the 1650 for you guys. I’m getting a whining noise from what I believe to be the hydraulic system between my legs on the seat. It is louder and quieter at different times. I also took a temperature gun reading of the housing underneath the seat, it was 190 degrees...- RLTW
- Thread
- Replies: 12
- Forum: Oliver, Cletrac, Co-op and Cockshutt
-
R
66’ Oliver 1650D won’t start
Dieseltech was right. I tore the pump down, and the plungers (along with everything else) were gummed up with varnish or algae or whatever. I cleaned it up, put an o-ring kit and a new one piece gov. weight cage and ring in it. Got it running yesterday. Thanks for the helpful replies.- RLTW
- Post #7
- Forum: Oliver, Cletrac, Co-op and Cockshutt
-
R
66’ Oliver 1650D won’t start
I have a 66’ Oliver 1650 diesel that won’t start. Bought it non running for a project. Previous owner had algae in the fuel and parked it. Been parked 8-10 years. I have changed all filters, drained old fuel, put new fuel in with injector cleaner, cleaned the sediment bowl and blown out fitting...- RLTW
- Thread
- Replies: 7
- Forum: Oliver, Cletrac, Co-op and Cockshutt
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy