Recent content by Rob Sponenberg

  1. R

    WD-45 rear main seal

    Maybe Agco wants you to buy a new tractor..lol.Some and I stess SOME of the aftermarket stuff is good or better that Agco anyway!!! I have an old retired friend that bought out a couple allis dealers over the years,thats who I see first..
  2. R

    rotor and cap for I600AC

    Yep your right points and condenser just did my WD45 same symtoms...
  3. R

    advice on making hay this time of the year

    Well if you needed the hay ya do what you have to to get it.I had to rake 3 rows together on my 3rd crop this year,needed the hay.. But if your selling it you got more fuel and time in it then you'll ever get out of it. Rule of thumb when making hay 2nd crop will be about half of what 1st crop...
  4. R

    CA cutout sticking closed

    Still charging good this is what I dont get?????you would think if its shorted it wouldn't charge???
  5. R

    CA cutout sticking closed

    OK,did a little checking with a voltmeter today,I have 6.50 volts on BOTH generator posts with the ingintion switch off and the light switch off??? With the switches off all I have to do is push the contact together on the cutout and they stick instant discharge!!!!
  6. R

    CA cutout sticking closed

    Need to check voltage tomorrow also will check the 3rd brush,didn't even know it was ajustable untill I read some old posts on here. Needle on the amp meter goes to 20amps at anything above idle and stays there at idle it bounces around very eratic,may even read a discharge????When I shut the...
  7. R

    CA cutout sticking closed

    Replaced the cutout on the generator today and now it stickes closed.. Also seems to be charging very high 20amps all the time with the switch in the middle or all the way out!!! HELP!!!!!
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top