(800) 853-2651
SHOP NOW

Recent content by RobRightmyer

Yesterday's Tractor Forums
  1. RobRightmyer

    Farmall H - Stuck brake cover

    Thanks for all the help. We got the brake band out. Now we'll just have to clean it up before we put it back together so it doesn't get stuck again.
  2. RobRightmyer

    Farmall H - Stuck brake cover

    Thanks. We did not think of a pipe wrench. We put the half moon back in the slot and put the arm back on the lever, and we could not get it to turn. But yeah, a big pipe wrench. We'll see. Thank you.
  3. RobRightmyer

    Farmall H - Stuck brake cover

    Thanks for all the help. We got the cover off, but the brakes don't wanna come off, and the lever that attaches to the brakes seems to be stuck in the engine. We've sprayed it to loosen. Are we able to apply heat to the outside? Anyone else had it stuck like this that bad? Thanks for all...
  4. RobRightmyer

    Farmall H - Stuck brake cover

    I think I've gotten all the bolts out. I took additional pictures. I should also mention, this tire's locked up. Seems the brakes are just too tight against the inside for whatever reason. And also, if you look at the bottom, it looks like it's rusted out where the adjustment bolt used to be...
  5. RobRightmyer

    Farmall H - Stuck brake cover

    Any hints on how to get the cover off - brakes are locked up on this side and the cover does not want to come off. Thanks for any help you can provide, Rob
  6. RobRightmyer

    Case 444 Service Manual

    sorry if I posted a site I should not link to - don't tend to read rules make life easier. can I link to grok? - https://grok.com/share/c2hhcmQtMw_23c3cabe-533d-4b92-adb0-8b5a2df13f42 which has the info?
  7. RobRightmyer

    Case 444 Service Manual

    Grok says the manual is here: https://nnalert/doc/47347567/Case-Garden-Tractors-Case-444-446-448-Service-Manual and here: https://www.casecoltingersoll.com/d3/manuals/OperatorManuals/Case%20220,%20222,%20224%20&%20444%20Operator's%20Manual%209-7074_watermarked.pdf
  8. RobRightmyer

    Finally spit tractor to get to stuck clutch - what is the consensus here?

    Thanks for all the help. Especially with Kevin convincing us it was not too hard to split. Tractor is back together and working well. If anyone does want to borrow a splitting stand we are currently not using ours. We live near Ithaca, NY. Not looking to sell as I'm certain we will have use...
  9. RobRightmyer

    F-20 stuck pistons.

    Looks nice. I would have to say it's well worth the effort.
  10. RobRightmyer

    830 project is done almost

    awesome thanks for sharing
  11. RobRightmyer

    Finally spit tractor to get to stuck clutch - what is the consensus here?

    I got the clutch kit coming from this site, we will have a good time putting it in. Thanks for all the feedback and view points and to Kevin for the initial video which made splitting looks easy.
  12. RobRightmyer

    Finally spit tractor to get to stuck clutch - what is the consensus here?

    I am not flipping this. It's my plowing A. I got it maybe 10 years ago with chains, front plow and wood mower for $1250. She's hand crank and has always run just the clutch got stuck due to not being run in the summer and mice getting in.
  13. RobRightmyer

    Finally spit tractor to get to stuck clutch - what is the consensus here?

    Thanks for the help.
  14. RobRightmyer

    Finally spit tractor to get to stuck clutch - what is the consensus here?

    The budget is not an issue if you look at my picture of the pressure plate, that pressure plate looks nothing like the advertised one sold here. That is my major concern. We will use a new clutch plate as it's apart. And as Kevin said, it's not that hard to split p the first time kind of...
  15. RobRightmyer

    Finally spit tractor to get to stuck clutch - what is the consensus here?

    Thanks to Kevin for sending me the link to a video of how he splits his A's. The clutch was not stuck to the flywheel but instead the edges were stuck due to the critters that got in there. I'm not certain we even need a new clutch but it couldn't hurt. The pressure play looks very different...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top