Recent content by Rokon

  1. R

    Ford 3000 lift cover

    thanks finding a few pictures I think you may be right I will pull the pto this week as I get time. If it is the ring gear rivet is there enough room in the carrier to replace them with bolts?
  2. R

    Ford 3000 lift cover

    Thanks for the tip on the filter but I don't think this is the shifter rail cap This is thick cast it looks like it broke off of a shaft not like the plug you mentioned
  3. R

    Ford 3000 lift cover

    I removed my lift cover to try to figure out what was causing my three point to go up but not come back down and found the case Had lots of crud and too broken pieces in bottom. I have figured out where this spring goes but there is a round piece that looks like it has broken off the end...
  4. R

    Ford 3000 steering box

    all right I'm back I got the steering gear repaired and functioning as manual at the moment now the lines had been removed from the cylinders to the steering gear valve assembly and they are bent up in such away I don't know which one goes where does anyone possibly have photos that could show...
  5. R

    Ford 3000 steering box

    you got it! Figured it was something off the wall. Im going ahead with the repair once the parts come in. Ill try to keep the frankintractor running with the 2910 box!
  6. R

    Ford 3000 steering box

    yes i do! My father inlaw used to make them he was the factory!
  7. R

    Ford 3000 steering box

    close but mine is power steering bit definitely on the right track! Thanks!The bearing I am pointing out in my picture looks like it just has loose ball bearings that should go in there
  8. R

    Ford 3000 steering box

  9. R

    Ford 3000 steering box

    ok well I can't figure out how to upload these photos ill have some try to help tonight
  10. R

    Ford 3000 steering box

    o the upper bearing is missing all of the ball bearings but I still cannot figure out what type of box this is
  11. R

    Ford 3000 steering box

    ts factory lines go from pump to gear
  12. R

    Ford 3000 steering box

    definitely not The one in the link mine has two sector shafts ill post pics some time tomorrow as i find time The tractor is definitely a 3000 but there is no telling where this steering gear assembly came from it's been replaced once and gone into once
  13. R

    Ford 3000 steering box

    So I have a 1972 Ford 3003 cylinder diesel with power steering I'm attempting to repair the power steering gearbox but I'm having trouble finding parts diagram for the gearbox all of the diagrams that I find more of a style that have separate caps on each side out of the boxes in mine does not...
  14. R

    Ford 3000 3 cylinder diesel

    thanks i looked everywhere to find it found plenty of tourqe specs but no bore...
  15. R

    Ford 3000 3 cylinder diesel

    So I inherited A ford 3003 cylinder diesel that Rainwater had entered in the cylinders through exhaust manifold disassembled and getting ready to start honing to see if it's salvageable but I cannot find any cylinder bore specs on this engine online can anyone help.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top