Recent content by ronboy

  1. R

    Old New Idea Manure Spreader Identification

    front right lower corner.
  2. R

    Old New Idea Manure Spreader Identification

    I recently bought an old New Idea manure spreader, and was wondering if anyone could help me identify the year made or approximate year. Here's what I see on the little metal plate: LOT 389, s/n B-126 597, 117. I assume that the 117 is the model number as I have seen some topics about 217's...
  3. R

    Long 2510 hydraulics problem

    Thanks u guys for the ideas. I'll try and get bavk. Preciate.
  4. R

    Long 2510 hydraulics problem

    Hope to get some ideas from you all. My 3 point hydruaulics is chattering when about 2/3 of way up. I've changed the filter, change the pressure relief valve, fluid level fine. Getting the recommended 2550 PSI. The front hydraulic is working fine. Any suggestions appreciated.
  5. R

    2N fuel/no start problem

    Thanks again all. I typed out my futher trials about 8 subjects down. Please take a look and I"ll try any and all further suggestions. TY
  6. R

    2N fuel problem

    Thanks Bruce, Old and R Geiger for your kindly responses. I was gone a day after posted and just got back in after messing w/the tractor befor posting back. #1 - its a 12V system. #2 - I started it up and it ran for rxactly 4 minutes before shutting down w/o a single sputter. #3- fuel flowing...
  7. R

    2N fuel problem

    1st of all, thanks for help in the past on this forum. My 2N will not not run over 5-10 seconds ( 30-60 seconds if let sit a day or two). One guy from dealership told me probably need carb float adjustment, but I wonder about that. The bowl is clean and fuel flows freely into it and into carb...
  8. R

    2N Toe-in question

    Thanks again, if any more ideas, please scroll down about 10 topics for my findings so far.
  9. R

    toe in question on 2N ('46)

    Duey: Please realize I'm am amateur at this project and appreciate your guidance. Soundguy and Madfarmer kind of thought jumped/skipped tooth (does that 1/2-3/4 inch indicate that?). If so, I'll need more details removing sector bolts and raising sectors up 1/2 inch and other details in the...
  10. R

    toe in question on 2N ('46)

    Thanks all you guys for trying to help first of all. I've been messin around with it this AM. What I found that could shed some light on the problem is this: sector arm on right side (the side that has the gas throttle lever on) has 1/2-3/4 inch play before it engages steering wheel. The other...
  11. R

    toe in question on 2N ('46)

    Bob, will try that in morning. Thanks. thanks.
  12. R

    toe in question on 2N ('46)

    I hit a hidden stump while bushhogging the other day. Front wheels were way out of alighnment. I adjusted both drag links to get best possible combination, that being both of them screwed all the way up to try to bring toe in in. Both wheels have pretty severe toe out. From past forum...
  13. R

    pto output shaft removal - 2N ('46)

    Thanks JMOR for the pictures. There's no way I'm up to the task of doing all that's required to get back to 100 per cent. I'm sure to have a dealership/repair shop do it would be a bunch. I'll check Monday morning and report. I just don't have the cash if crazy. The bush hog works fine so...
  14. R

    pto output shaft removal - 2N ('46)

    thanks RGeiger as well. I went out to barn after our input and yes it was not engaged when I tried to pull it out. Where is this ORS anyway?
  15. R

    pto output shaft removal - 2N ('46)

    1st of all, thanks for the quick respones - you guys are great. 2nd of all, didn't like the responses - just kidding. Yes JMor, it just won't pull out. If the "ORS" you mentioned Del is the "attachment" on the pto shaft for a bush hog, yes it has always had one. What does ORS stand for? I...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top