Recent content by roper4570

  1. roper4570

    McCormick M or # 10 grain drill parts

    Some John Deere drills use a clevis very similar to that one. Model DRB is a common one.
  2. roper4570

    Another tractor

    Another tractor
  3. roper4570

    Whitte hit-and-miss engine

    Most of these engines have a pet-cock that you can open to prime the engine. When starting leave pet-cock open to allow some compression to escape making it easier to start. After it starts close pet-cock but be careful as when it fires it can burn you.
  4. roper4570

    What Is This Kind Pulley Mount Called?

    They are called taper-lock. They can accommodate v-belts or sprockets
  5. roper4570

    Rpm drop low when hitting short grass with bush hog?

    I would start by checking fuel filters and air filters. Recently worked on a friend’s tractor that the air intake pipe was almost completely plugged with mud dauber nests.
  6. roper4570

    Looking for my grandpas Farmalls

    Maybe you can check his bank records. If they wrote him a check, that may be a good lead to start
  7. roper4570

    Need to build a shop on the cheap

    Give these guys a call as they can give you a price on materials. Have used them many times. Great folks to deal with.
  8. roper4570

    Looking to buy a pair of binoculars

    Vortex are fine quality and the optics are even more clear than some higher priced products. Their rifle scopes are great too.
  9. roper4570

    '81 F2 fuel restriction

    Try by-passing the priming pump. Have replaced many of those as they start sucking air or internal check valve is bad or has trash in it.
  10. roper4570

    Working on the '49 M.

    Spray some good penetrating oil in it and use a fine wire or drill bit then compress air. Check it once in a while to insure it’s open.
  11. roper4570

    Working on the '49 M.

    Right under the top cap you removed is a small hole to drain water and dust. Have worked on several that were blocked by rust and dirt.
  12. roper4570

    Cork crankshaft seals

    I rebuilt a Wisconsin 12 hp a few years ago. I soaked the cork seals in engine oil for a few hours before installing them. Still using engine-no leaks. David
  13. roper4570

    Case 530: “Some Days I Just Can’t Win”

    Can you hear or feel gears sliding in engagement with engine shut down?
  14. roper4570

    What tractors did you drive as a kids?

    Started out on L Case at 6 LA Case 900 B case 930 longnose 932 Case When I first started farming 1030 1175 1570 1976 wish I still had that one 2590 4490
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top