Recent content by Rs511

  1. R

    Ford 850 hydraulics

    So I finally was able to get the lift cover off again. The nut on the end of the draft pin was loose and about to come if so,I tightened that down. The triangle plate with the pin behind the large draft spring was worn, so I substituted a washer to make up the difference in the wear. The...
  2. R

    Ford 850 hydraulics

    Thanks for responding Sean, I looked at the cam and I did not see any appreciable wear on it. I hopefully will pull the cover this weekend and do the adjustments and check the cam again. Hopefully the adjustment will correct this issue.
  3. R

    Ford 850 hydraulics

    Hello guys, I hope someone can give me a little guidance here. The 3 point lift arms will go all the way to the top when the lift handle is only at the halfway point in the quadrant while in position control. The lift arms will lift incrementally with the lift handle until I reach the halfway...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top