Recent content by rsoyring

  1. R

    Ferguson TO20 temperature gauge

    The what I believe is a wire going to the "probe" it s flatten rubber "wire" if that makes sense haha. I don t believe it to be a copper tube as it s feels flat inside. Also it came from the store all coiled up tight. It seems weird they would sell it all bent if it s a fragile as you guys are...
  2. R

    TO-20 temperature gauge

    I thought it was pretty crazy too! On mine it s mounted on the other side of the dash as the oil pressure, I almost wonder if this was like an "aftermarket" option because it wasn t sealed nearly as well as the oil pressure. The oil pressure gauge is completely fine but the water temp was rusted...
  3. R

    Ferguson TO20 temperature gauge

    I had just picked one up, the old one is completely junk can?t even see the gauge due to rust, from what I understand is you take the long wire it already has attached and that goes in on the front of the engine block. I assume the gauge needs to be powered, it appears one wire goes to the...
  4. R

    Ferguson TO20 temperature gauge

    Hey guys looking for some help on replacing the temperature gauge on my TO20 not sure exactly what wires went were as there all chewed up by mice. On the new temperature gauge it has two threaded bolts that come down on each side a wire to the probe and then one little connector looking piece...
  5. R

    Ferguson TO-20 No Spark

    Finally got it to run the other day! Need all new coil, condenser, points and a new wire from the coil to distributor housing. Seems to run fine except for a little leak from the valve cover gasket, already got a new gasket ordered, thanks for your help much appreciated!
  6. R

    Ferguson TO-20 No Spark

    Alright update #2 I went and bought the NAPA coil I was recommended, installed it and had spark if I held it to the block. Then went and got points, condenser and rotor. Went to put them on and checked spark at the plug still no spark. Went back to the coil and now it won?t spark. Recharged the...
  7. R

    Ferguson TO-20 No Spark

    Thanks for the suggestions! The parts guy told me the 12V coil would work although I was thinking that doesn?t seem right. I?m gonna order some more parts on Monday and later this week I?ll hopefully have it running! I replaced the engine oil already was just black no white! Also have replaced...
  8. R

    Ferguson TO-20 No Spark

    Hello first time trying to get this 1950 Ferguson TO-20 tractor running in 6 years it?s still the original 6V positive ground. Got new battery, new coil(was told 12V coil will work), new plug wires, new distributor cap. I can?t seem to get any spark, I took an electrical tester and I have...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top