1. R

    4230 hydraulics

    i have a 4230 JD that's having two hydraulic problems. 1st problem is the low pressure line from the power steering metering pump (mounted at the bottom of the steering shaft) and the steering valve (mounted on the engine side of the firewall just above the motor) is blowing due to high pressure...
  2. R

    4020 hydraulic pump

    Very good - thanks for the help.
  3. R

    4020 hydraulic pump

    Thank you. Good to see repeat comments - confirming.
  4. R

    4020 hydraulic pump

    Thx. That's some work. We made a little puller to get in the tight space. Wouldn't of been able to do that if all the threads were gone. The upside of making the puller is another tool.
  5. R

    4020 hydraulic pump

    good advice. Thx, I'll do that.
  6. R

    4020 hydraulic pump

    very good. thanks. The one bushing was shot and the other one in poor shape. There were still a few threads left, so with a specially built puller, we were able to get the pully off.
  7. R

    4020 hydraulic pump

    Does anyone know how to determine if the pump on a 4020 (same as 4010, 3020, etc) is bad or not. I had the pully break that runs the water pump and alternator as well as connects to the pump drive coupler. i don't know what caused the pully to break (it broke out one of the threaded taps where...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top