Recent content by SAM STITZER

  1. S

    john deere a

    stubby wrench was used not the nicest design though.
  2. S

    john deere a

    this there an easier way to remove the oil line from the block the way I've been doing it is to turn the nut off while it is still in tractor, getting older and not as flexible as I once was to twist my arm in around crank and rods,any ideas would be appreciated thanks, sam
  3. S

    BLOOMSBURG PA PULL

    DOES ANYONE KNOW THE DATE OF THE BLOOMSBURG FAIR ANTIQUE PULL
  4. S

    GEAR REDUCTION STARTERS

    ran new 00 wire for the ground last nite replacing the 4 guage cable tractor started so much easier than ever thanks for the solution....
  5. S

    GEAR REDUCTION STARTERS

    I HAVE A 51 A WITH FAIRLY HIGH COMPRESSION THAT I WOULD LIKE TO PUT A GEAR REDUCTION STARTER ON I CAN FIND THE TOP MOUNT ONE BUT NOT THE ONE THAT MOUNTS INSIDE THE TRACTOR, DOES ANYONE KNOW IF SUCH A THING EXISTS?
  6. S

    PEPCOCKS

    DO YOU HAPPEN TO HAVE 2 OF THEM?
  7. S

    PEPCOCKS

    the center one is it. thanks
  8. S

    PEPCOCKS

    LOOKING FOR LARGE HOLE PEPCOCKS ( MAY NOT BE CORRECT SPELLING) PREFER JOHN DEERE STYLE BUT THEY NEED TO BE STRAIGHT DEERE ONLY HAS ANGLED ONES ANYMORE
  9. S

    EXTERNAL CRACK ON BLOCK

    THE TRACTOR IS A 51 MODEL A ,SORRY FORGOT TO PUT ON PREVIOUS POST THE CRACK IS APPROX. 1" LONG
  10. S

    EXTERNAL CRACK ON BLOCK

    AT A PULL THIS PAST SATURDAY FOUND WATER LEAKING FROM BOTTOM OF BLOCK IT HAD BEEN REPAIRED AT SOME POINTNOT BY ME, AND THE SILICONED PATCH RUSTED OUT, I PLAN ON CLEANING ALL THAT STUFF OFF AND USE DEFCON TO RESEAL IT AND PUT BOILER SEALER IN RADIATOR AM I HEADING IN THE CORRECT DIRECTION OR...
  11. S

    john deere A

    ANY PICTURES OF THAT TRACTOR
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top