Recent content by SD Watt

  1. S

    706 PTO problems

    Thanks for the replies I'll tear into it this spring and let you know what I find. the loader was a project that I hoped to get done before winter came... good thing I kept the other loader around. Now I need to figure out how to plumb for power beyond.....
  2. S

    706 PTO problems

    Hello all, my 706 pto has been giving me touble trying to get it engaged. It usually takes a few cycles of the pto lever and speeding the engine up to get it to kick in. Once it starts it doesn't slip and it will engage and disengage like it should. I was thinking that the pump was loosing prime...
  3. S

    glow plug amp draw

    hi everyone, Im redoing the wiring for the glow plugs on my 706 and I was wondering what the total amp rating was for them. The reason I'm asking is because I was thinking of istalling a relay to switch them, is it even worth trying? Finnally I've heard that having a spring on the dump valve...
  4. S

    706 clutch pedal

    thanks for the reply, can the nut be gotten at by removing the cover just below it, or does it have to come from the back?
  5. S

    706 clutch pedal

    Hello everyone, I'm trying to remove the clutch pedal shaft off the side of my 706 to try and eliminate the side to side play of the pedal. How does the shaft come out, I got it to turn but i can't get it out. Thank you for any help.
  6. S

    400 TA and clutch problems

    Thanks guys for the help, I did forget to mention that pulling the TA back doesn't help, and that there is a slight vibration felt when the ta lever is pulled back. I am going to look at the TA on my 450 to see if there are any worn parts. again thank you
  7. S

    400 TA and clutch problems

    Hello everyone I have a neighbor that has a 400 that when the tractor is parked on an incline it is hard to shift gears. I tried adjusting the linkages and that didn't help plus the linkages were at the limits for adjusting. Finally I took the inspection cover off the TA, nothing looked too out...
  8. S

    706 TA issues

    Thanks for the replies i will adjust it tonight hopefully. And there is a fair amount of oil leaking into the clutch housing. But if that is the problem wouldn't it slip in low too?
  9. S

    706 TA issues

    Hello this is my first time posting to this site. Anyway I have a 706D with TA problems. First the TA pulls great in low but it will slip in high. it will eventually go into high as long as there is no load behind it or it isn't going uphill. The steering and breaks work fine. Is this an...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top