Recent content by shoptek

  1. S

    460 Farmall Head

    OK we filed the sleeves down to about flush with the block but now we found out where the head gasket blew the block has a .003 depression right between the cylinders. We are not going to have the block decked. will this cause a problem again there. where it blew one sleeve was flush and the...
  2. S

    460 Farmall Head

    Photo
  3. S

    460 Farmall Head

    How much can a block be off on this tractor and still get the head gasket to seal. Between one and two cylinders it is low about 3 thousandths of an inch and this is where the head gasket blew last time. We did find that that sleeve was sticking out about 8 thousandths of an inch which would...
  4. S

    460 Farmall Head gasket

    My brother has a 460 that the head gasket keeps leaking on it. It has been replaced twice and the guy that replaced it said he had to over torque it to get it to quit leaking. Well it is leaking again. so we pulled the head and found out that the 5 & 6 sleeve sticks up about 8-10 thousands of an...
  5. S

    MM 670 Hydraulic problem

    It has original tractor valves and it was acting up before I changed the filter, that"s why I changed it.Also when I had the filter off about 1 gallon of oil ran out of the filter housing fairly fast when I had the filter off. Both valves work the same so it can"t be in just one of the valves. I...
  6. S

    MM 670 Hydraulic problem

    I have a MM 670 Super tractor that the hydraulics have started acting up on. When I raise or tilt the bucket (it has a loader on it) the hydraulics jerk and sometimes stop. I changed the filter and the oil is full. It acts like it has air in the line but it doesn"t that I know of. I put a...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top