(800) 853-2651
SHOP NOW

Recent content by smtapaul

Yesterday's Tractor Forums
  1. S

    smta water pump packing nut

    I called my local IH dealer a smart wrench in his time and he said that the only way to get to the packing nut is to remove the hood,grill and support radiator rod then pull the radiator forward to gain access to the nut.He did mention the spanner wrench but this is only for use on the Ms and...
  2. S

    smta water pump packing nut

    Yes,two shots into each fitting that was my first thought and have followed the service manual for the many years I have owned this tractor.All service has been done to the book,even flushed the cooling system this passed fall,not much crud came out.Any more ideas?
  3. S

    smta water pump packing nut

    I have read some posts on tighting this nut a very small leak to say the least there is no way to get to this nut with a drift or punch the angle just is just not right. Any help to stop the weep will be appreciated. Paul.
  4. S

    Float Sticking

    You might try tapping on the bowl just in case a pice of dirt is causing the problem but my guess is that the float has a pin hole in it,best to remove and rebuild carb.kits are cheap and your problem will be resolved for good.
  5. S

    repaint

    CNKS. I am not that familer with any painting,what is surfacer?Also want to know how many gallons of paint,primer,surfacer and how many coats to apply,sorry for all the questions but my expertice is mechanical.Having every nut and bolt engine and transmission you name it overhauled in my shop...
  6. S

    repaint

    CNKS.What is the difference between 2150 and ppg 71310? I do not plan on using hardner since I do not have the proper equipment.Thank you for your comments. Paul.
  7. S

    repaint

    There is a vast ammount of info on this site and allot of advice,this will be my first attempt at painting my smta,this tractor has one coat over the orignal,no rust the paint is in fairley good condition but faded.Only bad spot is the gas tank due to spills,some paint runs from the last poor...
  8. S

    need pertronix input from users

    I installed one on my smta,this tractor is 12 volt neg ground factory stock option and is used for antique tractor pulls.Boy what a difference it makes,I did switch to auto lite plugs and gap is set at 45 and there is a difference in increased horse power. You really do not have to change the...
  9. S

    Any one out there from Aberden S D area?

    Worked on my grand parrents farm in or arround brenford S D many years ago, just was wondering if there was any one familer with the area. Paul.
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top