Recent content by steve in ok

  1. S

    Ford 660 barely runs.

    I have a 850 and it did the same thing. The copper strip in the distributor was cracked and the condenser was bad. Check the copper strip and replace the condenser. Mine was a new condenser so I do not know if the cracked copper strip hurt it or if it just went bad but I replaced the copper...
  2. S

    1953 Ford NAA Jubileee erratic idle, carburetor trouble?

    My was doing about the same thing and it was the condenser that was the culprit. The copper strip in the distributor was cracked and when I fixed that it still acted like it was flooding and would not run above idle at all. I swapped the condenser with an old one I had and that fixed it.
  3. S

    John Deere disc mower

    Kuhn makes a 5'3" disc mower model GMD16. It may be different number if it is an older unit. Buddy of mine had a 9' john deere made by KUHN and when he went to the Deere dealer to buy new skids for it they were Kuhn orange so, he made them give him a can of green paint:)
  4. S

    Ford 3000 with Holley carb - rebuild or ebay replacement?

    It looks like you just found your starting issues.
  5. S

    Tool Prices....

    John T, Williams tools are the ones I look for at garage sales. They are my favorite. I have a lot of snap on and Mac because those were the trucks that came by when I worked for a case dealer in the late seventies and early eighties. I started with a small set of SK tools.
  6. S

    Another interesting phenomenon

    Very likely you enter a small tear in the fabric of reality and will never see that again! :ROFLMAO:
  7. S

    Marvel Schebler TSX ID/Differences

    Check here: https://carbkitsource.com/numbers/Marvel-Schebler/Marvel-Schebler_TSX_parts.html
  8. S

    copper strip in distributor got me!

    UPDATE! not only was the copper strip cracked but the condenser was bad also, or the cracked power strip damaged the condenser. Either way she is running good again.
  9. S

    3020 Gas or 3010 Diesel

    I think both would be fine tractors. I ran a 3020LP for years and the only thing i wished for was more torque. So, I would go with the diesel if I were buying one now.
  10. S

    Priming 850

    Thanks for the help. Just a small amount of pressure and it was working great.
  11. S

    Priming 850

    Thanks for the reply. I will try the pressure.
  12. S

    Priming 850

    Which plug do i need to prime and about how much fluid. Thanks
  13. S

    New calf in the kingdom

    She just paid for herself,:) I would commute her sentence!
  14. S

    The Gehl round baler accessory that wasn't (video)....

    Looks a lot more complicated than the rubber wheels that seemed to work pretty good for me. May be why we didn't see the power wheels.
  15. S

    John Deere 3020

    I bypassed the connector with a wire from one side of it to the other.

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top