(800) 853-2651
SHOP NOW

Recent content by sv_morris

Yesterday's Tractor Forums
  1. S

    TO20 Hood Bolts

    Not sure why they don't supply with washes and nuts. I have never seen an original te20 with nuts welded to the brackets. Simply buy two 7/16th nuts and split lock washers. As previously mentioned the bonnet pivots on the flat part of the bolt so isn't an issue. You could even use a nylock nut...
  2. S

    Missing Govenor!!!!!!!

    As far as I know it is the original engine. I can only assume someone removed it and didnt bother putting it back. Very odd. I think the govenor pin must be for replacing the pin attaching weights but still unsure of the govenor shaft seal. Thanks all for your help so far.
  3. S

    Missing Govenor!!!!!!!

    HI All, Half way through a TED20 restoration and still having trouble with getting the tractor run properly I decided to replace the governor. Having removed the timing cover last night I was astonished to find no governor what-so-ever!!! No wonder it hasn't been running well. I do however now...
  4. S

    changing govenor

    Thanks. It's a ted20 in fact. Standard engine. Has a chain.
  5. S

    changing govenor

    Thanks! Any tips for removing crank pulley nut?
  6. S

    changing govenor

    Hi all. I want to change the govenor weights and cup on a te20. Need to remove the timing cover to do this and figured I would replace the timing chain at the same time. Question is, do I have to remive the whole front axle to do this? Looking at it, it looks as though I have to remove axle...
  7. S

    Ferguson te20 expert

    Hi All, I need a TE20 expert who leaves near Reading Hampshire UK to take a look at my tractor. Anyone have a contact or is anyone near by? Possibly a governor issue but possibly not.
  8. S

    Lucas FT57

    yes I appreciate that......Apologies, I will rephrase: Does anyone know what rim can be obtained to fit an original Lucas FT57 Cyclops light? I'm not worried about colour I can easily paint it. Many thanks
  9. S

    Lucas FT57

    Hi All, Does anyone know if there is a replacement Chrome rim available for the original Lucas FT57 Cyclops headlight? If so, from where and what part no? many thanks
  10. S

    spares for zenith 24t2 carb

    Thanks for the reply Bob. Missing 15/16 and 17. 17 is the major problem. Also have a broken part 25. I can get that but it's quite expensive. If anyone can help I would appreciate it. Thanks all
  11. S

    spares for zenith 24t2 carb

    Hi All, I have a missing automatic strangler (brass notched wheel) which dissapeared along with the nut a few weeks ago. I cant seem to find a spare anywhere. I have searched the usual (villiers/ acorn etc) but to no avail. Does anyone know where I can get one or does anyone have a spare? Many...
  12. S

    tie rod end replacement

    Hi All, Recently did this on a TE20 without a removal tool. If you tap a metal wedge (i used a big axe) between the steering box and bolt, then give the steering arm a big whack with a hammer it will pop off. Two or three hits will do the job.
  13. S

    Lucas lights for TE20

    Hi All, Looking for knowledge of ferguson TE20 Lucas lighting. Having done some reseach into the rear number plate light I am unsure which is the correct part number. It seems that common reproductions are for the L582. Looking at old archieves of lighting parts it looks more like the Lucas...
  14. S

    steering gear bushes-t20

    Thanks Tom. It will probably be a whole set. I belive there are inner and outer bushes in the T20 steering box. Once removed I will examine and let you know if they all need changing.
  15. S

    steering gear bushes-t20

    Hi All, Impossible to sourse steering gear bushes in the uk for a TE20. Will probably have to get these made up. Does anyone have the technical specs for these and has anyone got a good diagram of the TE20's steering box and componets? Cheers
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top