(800) 853-2651
SHOP NOW

Recent content by tcgman

Yesterday's Tractor Forums
  1. T

    clear spray paint

    who makes the best clear coat spray can paint for plastic?
  2. T

    Farmall 100 Cracked block

    We use the tractor in spring and summer for our garden. The crack came from just general use. From what I've been told these tractors were bad for cracking in this area because the entire front end bolts to the block on the right side. Right now it just leaks a very small amount of oil. I'm...
  3. T

    NAA Jubilee connecting rods

    just finished rebuilding one. the whole goes toward the camshaft.
  4. T

    Farmall 100 Cracked block

    I have a Farmall 100 with a cracked block. The tractor is in good shape. From what I have herd they were bad about cracking near the front of the block because the front end bolts to the bock. Can the block be welded if I tare it down?
  5. T

    Jubilee valve boots.

    Thanks. I would not have figured it out. That's what I get for waiting 4 months before putting it back together.
  6. T

    Jubilee valve boots.

    Putting the head back together for my jubilee. Got a gasket set from yesterday's tractor. There are 4 rubber boots in the set. I know they go on the valves but I'm not sure if they go on the intake or exhaust valve.
  7. T

    jubilee rear main seals

    Thanks bob. You were right. Upon further investigation I could see return wholes in the block. Thanks again for replying.
  8. T

    jubilee rear main seals

    I am currently putting back together my jubilee motor. I've had it torn down for a while. the rear main seal has 2 groves in the cap and block. The 2 piece rubber seal I know where it goes. the other grove has me puzzled. does a rope seal go there?
  9. T

    jubilee paint prep

    Thanks guys for the advice. I buy Brake clean by the case. Looking forward to finishing this project. Got a 1960 T340 bull Dozer next.
  10. T

    jubilee paint prep

    Just putting the motor back together and already thinking about painting. I washed and scrubbed the motor and parts with diesel fuel. What is good to prep the cast with that will get rid of all the oil imbedded in the metal?
  11. T

    6 to 12 volt lights

    these lights are seal beam. I just looked on steiner website and they do have them for aprox.$15.00. thank a bunch for your help.
  12. T

    6 to 12 volt lights

    Thanks for the reply. I'll check that out. Can i use the same generator and just replace the regulator with a 12 volt one?
  13. T

    lights

    Those bulb are sealed units. they don't have replacement bulb. this website charges around $118.00 for a set of headlights. the rear work light goes for $180.00. I think there is a way to use a resistor to reduce the volts, but i don't know what kind or how to use it.
  14. T

    6 to 12 volt lights

    I have a ford jubilee and switched it to a 12 volt system with a gm altenator that is self regulating. Now i want to make it 12volt with my old generator and a 12 volt regulator. My problem is the lights. I want to keep the same 6 volt lights because 12 volts are exspensive. is there a way to...
  15. T

    brake boot covers

    I"m working on a T340 international crawler. I"ve replaced the brakes to help it steer. the brake rod boot covers were gone and this is what caused all the problems. I can"t seem to find any boot covers. these covers are not round they are oblong. Does anybody know where i could find some?
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top