Recent content by Terry Gunn

  1. T

    MF 65 with Loader

    I have heard that about early 65’s. Mine is a 1958. So a pto pump and tank might be a better fit? If so, suggestions on pump size and tank size? Where is the best place to purchase?
  2. T

    MF 65 with Loader

    I have heard that about early 65’s. Mine is a 1958. So a pto pump and tank might be a better fit? If so, suggestions on pump size and tank size? Where is the best place to purchase?
  3. T

    MF 65 with Loader

    My loader is very weak. Extremely slow lifting a bucket of dirt or stone. Looking for advice on a fix. Add a PTO pump with tank? Shaft driven pump off the front? Or something else? Looking for the least expensive way to go so I can use my bucket better. Yesterday, the relief valve started...
  4. T

    MF 65 power steering pump

    Looks like this.
  5. T

    MF 65 power steering pump

    Thanks. I will replace the cylinder and fill up the reservoir and see what happens. Any leads on where I can get a replacement lid for reservoir. It fell off when discing.
  6. T

    MF 65 power steering pump

    Also, I got a new/used steering cylinder. Thoughts on if the power steering pumps really needs replaced? Cylinder leaks like a sieve so the pump hasn’t had any fluid in it for a while. Thanks again.
  7. T

    MF 65 power steering pump

    is there a removal/replacement instructions for a MF 65 power steering pump with reservoir? My manual doesnt really give much detail on this process. Thanks
  8. T

    MF 65 hydraulic issues

    The end was actually rolled between the end of the o ring. It was working ok until a few weeks ago. It has always been slow to lift but now hardly and lift at all. If I can find a new standpipe, I will do a pressure test and let you know.
  9. T

    MF 65 hydraulic issues

    Here is an interesting thing. The hydraulic standpipe was bent going into the pump. O ring was trashed. I take it that could be my issue, losing pressure. Here’s the interesting thing. The standpipe measure 12”. All I can find online are 12.50”. Can’t seem to find one that fits a 65. Help...
  10. T

    MF 65 hydraulic issues

    Tom, I finally had time to pull the PTO cover. There is no strainer or filter. I forgot to check pressure before I tore into it. Thoughts? Bad pump?
  11. T

    MF 65 hydraulic issues

    I am not sure about the strainer. So it could be clogged? I will investigate. If no strainer, you think the pump went bad?.
  12. T

    MF 65 hydraulic issues

    All hydraulics come from the internal system. Have a diverter valve to either use the 3 point or send hydraulic to the loader. I worked slow but when I used it last, scooped up some dirt and it struggled to lift. It seemed to help to give it more throttle but still very very slow.
  13. T

    MF 65 hydraulic issues

    My ‘59 65 has all of a sudden decided not to lift my front loader without weight. 3 point won’t lift anything over a few hundred pounds. Not sure how to diagnose the issue. Could my hydraulic pump failed? Believe it is original. Checked fluid, it is ok and at the correct level. It has alway be a...
  14. T

    Bucket for loader

    I have a Kelly Loader model #475. The 48” bucket is pretty much trash. Looking to replace with a 60” bucket but can’t really find one that isn’t a quick connect style. So with that said, is the a certain brand of quick connect assembly I should be looking for that fits a Kelley loader? And do...
  15. T

    MF 65 Hydraulic Issue

    Thanks for that. I checked and yep, I put the levers on the wrong side. Once I fixed that, it all works now. The only odd thing now, which I can deal with is, the controls are now opposite. When I push it into the down position, the arms come up. Pull them to the up position, the arms go down...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top