Recent content by TerryfromSWIowa

  1. TerryfromSWIowa

    New tractor

    Wow does not look like the same tractor.
  2. TerryfromSWIowa

    Dolly passed

    Naw only bends the forum rules slightly.
  3. TerryfromSWIowa

    When you need a tall perch

    My road is narrow from little traffic. I have many days when no one drives by except mailman spring and fall is busy time. There is about 4 feet of grass on each side to drive on if you meet another vehicle.
  4. TerryfromSWIowa

    Need some DURABLE 0.155 trimmer line (not steel cable)

    Never heard of soaking in water will try it though. How long do you soak it?
  5. TerryfromSWIowa

    Concerts - not Woodstock

    Been to Carls Corner many times in the 80's. First time I ever had salsa and chips was there got hooked on them. Never ran into Willie but they claim he stopped in often.
  6. TerryfromSWIowa

    Finally, something I actually NEED for my tool box.

    Can I still call my flip flops thongs without getting a strange look?
  7. TerryfromSWIowa

    1960 Ford 841 with issues

    Fill cylinders with ATF or Marvel and let it sit for a while. Makes a mess but spin it over with plugs out then proceed to get it running to get it hot. then check compression again. Check oil before running and change oil after you run it.
  8. TerryfromSWIowa

    How to Remove this Seal from Cylinder?

    Yes any good machine shop or welding shop should be able to fix you
  9. TerryfromSWIowa

    What happened to pickups??

    I didn't think the EPA crap started till 73 with the electronic ignition. and smog pumps.
  10. TerryfromSWIowa

    Anyone re-skin a 1950's shop?

    Spray foam inside and re sheet
  11. TerryfromSWIowa

    Compression tester

    Do you have an Oreillys close by? they have loaners or you can purchase.
  12. TerryfromSWIowa

    Generator starts but backfires.

    If you are extremely lucky you can get it running and place your hand over the throat of the carb and suck the debris out. Might work 1 out of 10 times.
  13. TerryfromSWIowa

    Generator starts but backfires.

    If it starts and dies why would you flood with the mix. It is a carb issue. Clean the carb.
  14. TerryfromSWIowa

    Todays funny

    See many videos of idiots trying to get a close up of the buffaloes. They deserve what they get, same idiots would try to pet a bear.
  15. TerryfromSWIowa

    PTO shaft adapter assistance

    Yep wrong shaft my Land Pride finish mower has a splined in both ends. No slip clutch.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top