Recent content by Tfphill

  1. T

    Internation 175b torque converter trans issue

    I have posted the picture. The port that I am having a problem with is R2. It is located in the to the top of the picture in the middle. It has a new copper line attached to it. I put a copper line on it to drain fluid to another location. I am wondering if the mechanic who worked on tractor...
  2. T

    Internation 175b torque converter trans issue

    Ok. I got the fan shrouding on. It helped heating issue. I am not getting any wind blowing into engine area. All air is pushing out through the radiator grill. I worked tractor at high engine rpm for about 20 min. In that time the temperature moved from 160F to 220F. Usually by this time...
  3. T

    Internation 175b torque converter trans issue

    The torque convertor was replaced because it had a problem with it not having power when pushing. I believe it was replaced and working. The mechanic who was working on it removed the torque convertor because he saw oil by starting motor. It turns out the oil was not leaking from the torque...
  4. T

    Internation 175b torque converter trans issue

    Thanks for the help. My fan is rigid. It is setup for it to push air from engine compartment through the radiator to hydraulic cooler. My father told me that the tractor was overheating from the time he got it (about 20 years or more ago). It was overheating with the owners before him too...
  5. T

    Internation 175b torque converter trans issue

    I forgot to mention that when I was checking pressures in 1st speed I could not hold tracks by pressing brakes. However when in reverse in 1st speed i could hold the tracks with brakes. What does this mean?
  6. T

    Internation 175b torque converter trans issue

    I have checked pressures in gears. They remain the same. I however have an overheating issue as well. I was told that the fan direction may have something to do with it. Right now the fan is pushing air towards the radiator. Is it supposed to be that direction or is it supposed to be pulling air...
  7. T

    Internation 175b torque converter trans issue

    Hello guys. Checked the preassure today. I got the following results: first number is at idle second number is at high idle. port#1 - 10psi/20psi port#2 - 85psi/95psi port#3 - 205psi/206psi any thoughts on my situation?
  8. T

    Internation 175b torque converter trans issue

    I have changed pressure filter, cleaned strainer and changed o- ring on suction filter. The tractor works better. I am getting all 4 speeds which it didnt get before when driving without load. However when I try to push with load in position 1 (lowrange) it pushes without slipping. Tracks...
  9. T

    Internation 175b torque converter trans issue

    ok. Thanks. Yea Barbados. That is where I am from and were the tractor is located. I am in Miami on business at the moment. Heading back tonight.
  10. T

    Internation 175b torque converter trans issue

    What is lub pressure? I know clutch and torque but I have no idea what LUB means? I am going to check pressures on Thursday when i get back to Barbados.
  11. T

    Internation 175b torque converter trans issue

    Thanks. You are helping allot. The screen was blocked with dirt. Looked almost like fibre or milky looking muck. The oil level in trans is just above the full mark. I don't want to cut trans filter yet cause I don't have a replacement. I will remove what looks like a paper outer shield that...
  12. T

    Internation 175b torque converter trans issue

    I located the pressure taps. There are 3 lines that run to a block at base of driver seat. I just have to get a pressure gauge to check. Any suggestions on how to identify which line is which?
  13. T

    Internation 175b torque converter trans issue

    1- the engine sounds strong when in gear and reved. There is a slight dip in revs when put in gear doesn't sound like its over labouring. 2- it works in 1st but feels as though it is not getting all that it should. 2,3,4 gives problem of drive shaft not turning at all. 3.- it has pushed...
  14. T

    Internation 175b torque converter trans issue

    I am confused now. So the drive shaft is not supposed to turn if tracks dont turn? So when I have it in 3rd forward and the tracks are not turning the shaft isnt turning even though there is no big load(just the ripper down) what would the problem now be? The torque converter or transmission?
  15. T

    Internation 175b torque converter trans issue

    I dont think the issue lies in the transmission. The drive shaft that comes out of torque converter housing is not turning when under load. It just stops spinning. Looks almost as though it is slipping.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top